# Moving selected faces to another body

**URL:** <https://discourse.shapr3d.com/t/moving-selected-faces-to-another-body/33276>\
**Category:** Modeling Questions\
**Created:** [August 13, 2024, 3:02pm UTC](https://discourse.shapr3d.com/t/moving-selected-faces-to-another-body/33276 "2024-08-13T15:02:03Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![evang](https://avatars.discourse-cdn.com/v4/letter/e/aeb1de/32.png) [@evang](https://discourse.shapr3d.com/u/evang)\
**Post date:** [August 13, 2024, 3:02pm UTC](https://discourse.shapr3d.com/t/moving-selected-faces-to-another-body/33276/1 "2024-08-13T15:02:03Z")

</div>

Hello community!

I apologize if this has been answered before but my search through this forum (and google) hasn’t really been working. I am new to Modeling so i apologize in advance!

I have attached a screenshot of what i’m looking at. i’m currently designing my own PC case / NAS. These HoneyComb faces are set for three 120mm fans. Originally, I had used the rectangle tool, extruded a cutout, and placed this plate in there.

The issue I ran into while doing this is even though everything was aligned perfectly, you could still see the seam line within my slicer before setting it to print. So, I was going to take this selected section, place it on the front face, and extrude it that way. But no matter if I copy, pattern, translate, etc i can’t seem to get it.

My question is:

1. I know you can’t copy & paste directly. Is there anyway other way to basically transfer the selected section to another body?

2. If not, is there any way to achieve this and/or copy/transfer this?

Any point in the right direction would be much appreciated!

 ![IMG_0010](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/4/b/4b3a431bb709e2dc2feed3413c4109d655e159b0.png)

---

<div class="post-metadata">

**Author:** ![automatom](https://avatars.discourse-cdn.com/v4/letter/a/7ea924/32.png) [@automatom](https://discourse.shapr3d.com/u/automatom)\
**Post date:** [August 13, 2024, 3:48pm UTC](https://discourse.shapr3d.com/t/moving-selected-faces-to-another-body/33276/2 "2024-08-13T15:48:01Z")

</div>

You can use the project tool