# Need help adding ridges to this body

**URL:** <https://discourse.shapr3d.com/t/need-help-adding-ridges-to-this-body/35266>\
**Category:** Modeling Questions\
**Created:** [November 22, 2024, 3:25am UTC](https://discourse.shapr3d.com/t/need-help-adding-ridges-to-this-body/35266 "2024-11-22T03:25:26Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![TheDisgrace](https://avatars.discourse-cdn.com/v4/letter/t/6de8d8/32.png) [@TheDisgrace](https://discourse.shapr3d.com/u/TheDisgrace)\
**Post date:** [November 22, 2024, 3:25am UTC](https://discourse.shapr3d.com/t/need-help-adding-ridges-to-this-body/35266/1 "2024-11-22T03:25:26Z")

</div>

Hello I’m brand new to shapr and any kind of modeling. I’ve been asking my girlfriend to give me ideas of things to model for practice. She showed me a picture of this cup and asked if I could make the first cup have the same ridges as the third cup  
I’ve got the body down I’m just struggling to add the ridges to the main body of the cup. I tried sweeping but it will only let me sweep from the top to the first intersection I don’t know if there is a better way to do this any advice?

---

<div class="post-metadata">

**Author:** ![TheDisgrace](https://avatars.discourse-cdn.com/v4/letter/t/6de8d8/32.png) [@TheDisgrace](https://discourse.shapr3d.com/u/TheDisgrace)\
**Post date:** [November 22, 2024, 3:25am UTC](https://discourse.shapr3d.com/t/need-help-adding-ridges-to-this-body/35266/2 "2024-11-22T03:25:58Z")

</div>

![IMG_0190](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/6/c/6c896c23fb5fbd60246b050109402927c336cde0.jpeg)  
This is what I’ve made so far

---

<div class="post-metadata">

**Author:** ![TheDisgrace](https://avatars.discourse-cdn.com/v4/letter/t/6de8d8/32.png) [@TheDisgrace](https://discourse.shapr3d.com/u/TheDisgrace)\
**Post date:** [November 22, 2024, 3:26am UTC](https://discourse.shapr3d.com/t/need-help-adding-ridges-to-this-body/35266/3 "2024-11-22T03:26:51Z")

</div>

![IMG_3357](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/2/d/2db1bba8f55a7e4d8c8f40e1fc38d9d5574603b8.jpeg)  
This is the picture she sent me

---

<div class="post-metadata">

**Author:** ![jean-philippe2](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/jean-philippe2/32/27353_2.png) [@jean-philippe2](https://discourse.shapr3d.com/u/jean-philippe2)\
**Post date:** [November 22, 2024, 10:48am UTC](https://discourse.shapr3d.com/t/need-help-adding-ridges-to-this-body/35266/4 "2024-11-22T10:48:21Z")

</div>

Hi and welcome,  
Have you try to use Revolution tool ?  
1• Sketch  
2• Revolution and Fillets  
3• Shell

 ![Capture d’écran 2024-11-22 à 11.45.43](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/4/c/4c2e2227275d0e076d699fa580411de19363be82.jpeg)  
 ![Capture d’écran 2024-11-22 à 11.45.14](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/4/9/495de97b947fdd5c46d10b899a8727a8b1b925b0.jpeg)

(see the screenshot)

---

<div class="post-metadata">

**Author:** ![TheDisgrace](https://avatars.discourse-cdn.com/v4/letter/t/6de8d8/32.png) [@TheDisgrace](https://discourse.shapr3d.com/u/TheDisgrace)\
**Post date:** [November 22, 2024, 1:39pm UTC](https://discourse.shapr3d.com/t/need-help-adding-ridges-to-this-body/35266/5 "2024-11-22T13:39:58Z")

</div>

Hello! I already used the revolve tool to make the body but I was struggling to add flutting around the whole cup. I want the model to have the same snap as the cup on the left but have the texture of the cup all the way on the right if that makes sense.

---

<div class="post-metadata">

**Author:** ![jean-philippe2](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/jean-philippe2/32/27353_2.png) [@jean-philippe2](https://discourse.shapr3d.com/u/jean-philippe2)\
**Post date:** [November 22, 2024, 1:56pm UTC](https://discourse.shapr3d.com/t/need-help-adding-ridges-to-this-body/35266/6 "2024-11-22T13:56:28Z")

</div>

[quote=“TheDisgrace, post:5, topic:35266”]  
flutting around the whole cup  
[/quote] ??  
If you speak of the texture, it’s not with Shapr3D. You must use an rendering application as Keyshot or others…

---

<div class="post-metadata">

**Author:** ![TheDisgrace](https://avatars.discourse-cdn.com/v4/letter/t/6de8d8/32.png) [@TheDisgrace](https://discourse.shapr3d.com/u/TheDisgrace)\
**Post date:** [November 22, 2024, 3:07pm UTC](https://discourse.shapr3d.com/t/need-help-adding-ridges-to-this-body/35266/7 "2024-11-22T15:07:37Z")

</div>

Ah I see. I was messing around with the model last night and it would only add flutting to the top of body and not the rest it was driving me nuts haha thank you for your help! Will definitely have more questions in the future 🙂