# New threat tool

**URL:** <https://discourse.shapr3d.com/t/new-threat-tool/42658>\
**Category:** What's new\
**Created:** [November 11, 2026, 5:31pm UTC](https://discourse.shapr3d.com/t/new-threat-tool/42658 "2026-11-11T17:31:06Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Khofar](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/khofar/32/17372_2.png) [@Khofar](https://discourse.shapr3d.com/u/Khofar)\
**Post date:** [November 11, 2026, 5:31pm UTC](https://discourse.shapr3d.com/t/new-threat-tool/42658/1 "2026-11-11T17:31:06Z")

</div>

The new threat tool is amazing and so helpful with all the sizes and shapes. It’s wonderful and powerful. Thank you Shapr3d ❤

---

<div class="post-metadata">

**Author:** ![Geoffree3](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/geoffree3/32/9580_2.png) [@Geoffree3](https://discourse.shapr3d.com/u/Geoffree3)\
**Post date:** [November 14, 2026, 10:43pm UTC](https://discourse.shapr3d.com/t/new-threat-tool/42658/2 "2026-11-14T22:43:54Z")

</div>

I haven’t seen this tool. Could be useful if one gets annoyed with some of the new ‘features’ 🙂

---

<div class="post-metadata">

**Author:** ![fortis3dllc](https://avatars.discourse-cdn.com/v4/letter/f/bcef8e/32.png) [@fortis3dllc](https://discourse.shapr3d.com/u/fortis3dllc)\
**Post date:** [November 14, 2026, 11:27pm UTC](https://discourse.shapr3d.com/t/new-threat-tool/42658/3 "2026-11-14T23:27:32Z")

</div>

Have you printed any model with the new thread tool and is it working properly? I have tried multiple times and I can’t get it quite right. Do we need to adjust the hole measurements on the receiving body?

---

<div class="post-metadata">

**Author:** ![pgmaker](https://avatars.discourse-cdn.com/v4/letter/p/e495f1/32.png) [@pgmaker](https://discourse.shapr3d.com/u/pgmaker)\
**Post date:** [November 17, 2026, 5:45pm UTC](https://discourse.shapr3d.com/t/new-threat-tool/42658/4 "2026-11-17T17:45:59Z")

</div>

wait until they add the tolerance tool. I know they posted there is one yet, but it will only be available in future updates. when I designed threads by using the rotate tool, I found 0.2mm tolerance in radius are perfect for 3d printing.

---

<div class="post-metadata">

**Author:** ![Akos\_Shapr3D](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/akos_shapr3d/32/32722_2.png) [@Akos\_Shapr3D](https://discourse.shapr3d.com/u/Akos_Shapr3D)\
**Post date:** [November 17, 2026, 7:20pm UTC](https://discourse.shapr3d.com/t/new-threat-tool/42658/5 "2026-11-17T19:20:46Z")

</div>

> [@pgmaker](#):
>
> wait until they add the tolerance tool.

It comes with the next release, in a week or so.
