# New version: 2.0.1

**URL:** <https://discourse.shapr3d.com/t/new-version-2-0-1/624>\
**Category:** Release notes\
**Created:** [December 14, 2016, 3:44pm UTC](https://discourse.shapr3d.com/t/new-version-2-0-1/624 "2016-12-14T15:44:00Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![Istvan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/istvan/32/23668_2.png) [@Istvan](https://discourse.shapr3d.com/u/Istvan)\
**Post date:** [December 14, 2016, 3:44pm UTC](https://discourse.shapr3d.com/t/new-version-2-0-1/624/1 "2016-12-14T15:44:00Z")

</div>

Shapr3D 2.0.1 is out, with a gazillion bugfixes and stability improvements.

Sorry for the previous release, we released it a bit early, it was rather buggy and unstable, but the current version is much better.

If you have any issues, let us know, and we will do our best to fix it.

Yay!

---

<div class="post-metadata">

**Author:** ![Vangoughedu](https://avatars.discourse-cdn.com/v4/letter/v/a9a28c/32.png) [@Vangoughedu](https://discourse.shapr3d.com/u/Vangoughedu)\
**Post date:** [December 14, 2016, 4:58pm UTC](https://discourse.shapr3d.com/t/new-version-2-0-1/624/2 "2016-12-14T16:58:58Z")

</div>

Transform handles work in zoomed mode. Thanks for the fix!

I noticed you offer an edu license. Is it free for university staff or only students/teachers?

---

<div class="post-metadata">

**Author:** ![Istvan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/istvan/32/23668_2.png) [@Istvan](https://discourse.shapr3d.com/u/Istvan)\
**Post date:** [December 14, 2016, 5:38pm UTC](https://discourse.shapr3d.com/t/new-version-2-0-1/624/3 "2016-12-14T17:38:04Z")

</div>

Yay!

Free for educational purposes. If you want to use it to teach in the university, then you can request it.

---

<div class="post-metadata">

**Author:** ![Bobcat](https://avatars.discourse-cdn.com/v4/letter/b/e9bcb4/32.png) [@Bobcat](https://discourse.shapr3d.com/u/Bobcat)\
**Post date:** [December 15, 2016, 4:16am UTC](https://discourse.shapr3d.com/t/new-version-2-0-1/624/4 "2016-12-15T04:16:51Z")

</div>

Has the ability to import drawings been added yet? I think the app is amazing, but I have no use without the ability to import drawings so I can draw on top of them

---

<div class="post-metadata">

**Author:** ![PhotoWorkPlace](https://avatars.discourse-cdn.com/v4/letter/p/278dde/32.png) [@PhotoWorkPlace](https://discourse.shapr3d.com/u/PhotoWorkPlace)\
**Post date:** [December 15, 2016, 4:47am UTC](https://discourse.shapr3d.com/t/new-version-2-0-1/624/5 "2016-12-15T04:47:28Z")

</div>

Still having the same problem of objects not duplicating but snapping back when dragged with the Copy clicked  
Also if Copyed isn’t highlighted the object will not only snap back but will then disappear  
Now this is not with every object but only those that will not duplicate  
Did a hard reset, downloaded an older version of the project to see if that would make a difference (it didn’t)  
Not sure what else to do

---

<div class="post-metadata">

**Author:** ![Istvan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/istvan/32/23668_2.png) [@Istvan](https://discourse.shapr3d.com/u/Istvan)\
**Post date:** [December 15, 2016, 5:16am UTC](https://discourse.shapr3d.com/t/new-version-2-0-1/624/6 "2016-12-15T05:16:38Z")

</div>

Can you send me that workspace please?

---

<div class="post-metadata">

**Author:** ![PhotoWorkPlace](https://avatars.discourse-cdn.com/v4/letter/p/278dde/32.png) [@PhotoWorkPlace](https://discourse.shapr3d.com/u/PhotoWorkPlace)\
**Post date:** [December 15, 2016, 5:41am UTC](https://discourse.shapr3d.com/t/new-version-2-0-1/624/7 "2016-12-15T05:41:06Z")

</div>

Will do, give us a second

---

<div class="post-metadata">

**Author:** ![Istvan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/istvan/32/23668_2.png) [@Istvan](https://discourse.shapr3d.com/u/Istvan)\
**Post date:** [December 15, 2016, 5:44am UTC](https://discourse.shapr3d.com/t/new-version-2-0-1/624/8 "2016-12-15T05:44:28Z")

</div>

Not yet, but in the groups window there is already an images tab. Very soon we will add image import.

---

<div class="post-metadata">

**Author:** ![PhotoWorkPlace](https://avatars.discourse-cdn.com/v4/letter/p/278dde/32.png) [@PhotoWorkPlace](https://discourse.shapr3d.com/u/PhotoWorkPlace)\
**Post date:** [December 15, 2016, 5:46am UTC](https://discourse.shapr3d.com/t/new-version-2-0-1/624/9 "2016-12-15T05:46:15Z")

</div>

[2016-12-08 Reformer Final.](https://www.dropbox.com/s/zadyai8bwjsemp9/2016-12-08%20Reformer%20Final.shapr?dl=0)

---

<div class="post-metadata">

**Author:** ![PhotoWorkPlace](https://avatars.discourse-cdn.com/v4/letter/p/278dde/32.png) [@PhotoWorkPlace](https://discourse.shapr3d.com/u/PhotoWorkPlace)\
**Post date:** [December 15, 2016, 5:52am UTC](https://discourse.shapr3d.com/t/new-version-2-0-1/624/10 "2016-12-15T05:52:26Z")

</div>

![](https://cdck-file-uploads-us1.s3.dualstack.us-west-2.amazonaws.com/flex002/uploads/shapr3d/original/1X/3a5487fd499b25112a7d5c268e77ecaf0dda9013.jpg)

---

<div class="post-metadata">

**Author:** ![Istvan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/istvan/32/23668_2.png) [@Istvan](https://discourse.shapr3d.com/u/Istvan)\
**Post date:** [December 15, 2016, 6:10am UTC](https://discourse.shapr3d.com/t/new-version-2-0-1/624/11 "2016-12-15T06:10:44Z")

</div>

Tbaks, looking into this.

---

<div class="post-metadata">

**Author:** ![Istvan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/istvan/32/23668_2.png) [@Istvan](https://discourse.shapr3d.com/u/Istvan)\
**Post date:** [December 15, 2016, 9:14am UTC](https://discourse.shapr3d.com/t/new-version-2-0-1/624/12 "2016-12-15T09:14:46Z")

</div>

Fixed! Fix will be included in the next release. Sorry for the inconvenience.

---

<div class="post-metadata">

**Author:** ![PhotoWorkPlace](https://avatars.discourse-cdn.com/v4/letter/p/278dde/32.png) [@PhotoWorkPlace](https://discourse.shapr3d.com/u/PhotoWorkPlace)\
**Post date:** [December 15, 2016, 12:14pm UTC](https://discourse.shapr3d.com/t/new-version-2-0-1/624/13 "2016-12-15T12:14:19Z")

</div>

No problem at all, happy you were able to get to the bottom of it! 😊

---

<div class="post-metadata">

**Author:** ![PhotoWorkPlace](https://avatars.discourse-cdn.com/v4/letter/p/278dde/32.png) [@PhotoWorkPlace](https://discourse.shapr3d.com/u/PhotoWorkPlace)\
**Post date:** [December 16, 2016, 7:54am UTC](https://discourse.shapr3d.com/t/new-version-2-0-1/624/14 "2016-12-16T07:54:21Z")

</div>

Having an issue where when you extend a shape it leaves the lines of the original end point  
When trying to Delete the line the whole shapes gets deleted  
Not sure if this is how it’s supposed to work in version 2 but it hadn’t acted like this before

---

<div class="post-metadata">

**Author:** ![PhotoWorkPlace](https://avatars.discourse-cdn.com/v4/letter/p/278dde/32.png) [@PhotoWorkPlace](https://discourse.shapr3d.com/u/PhotoWorkPlace)\
**Post date:** [December 16, 2016, 7:55am UTC](https://discourse.shapr3d.com/t/new-version-2-0-1/624/15 "2016-12-16T07:55:13Z")

</div>

![](https://cdck-file-uploads-us1.s3.dualstack.us-west-2.amazonaws.com/flex002/uploads/shapr3d/original/1X/67aab1ada41298eb10c44cb65acc853d6a85c176.PNG)

---

<div class="post-metadata">

**Author:** ![Istvan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/istvan/32/23668_2.png) [@Istvan](https://discourse.shapr3d.com/u/Istvan)\
**Post date:** [December 16, 2016, 8:06am UTC](https://discourse.shapr3d.com/t/new-version-2-0-1/624/16 "2016-12-16T08:06:11Z")

</div>

Currently thisbis how it supposed to work, but we will soon reimplement the line removal.

---

<div class="post-metadata">

**Author:** ![PhotoWorkPlace](https://avatars.discourse-cdn.com/v4/letter/p/278dde/32.png) [@PhotoWorkPlace](https://discourse.shapr3d.com/u/PhotoWorkPlace)\
**Post date:** [December 16, 2016, 8:22am UTC](https://discourse.shapr3d.com/t/new-version-2-0-1/624/17 "2016-12-16T08:22:58Z")

</div>

When you say "line removal"  
Is this through deleting or automatically?  
And just curious seeing that this was a choice of design  
Not sure how other people work, not having come from any professional training  
We spend a lot of time extending or decreasing the length of an object to get it to fit  
Already we are getting lots of extra lines so as to make any design rather confusing looking! 🙂  
How might have you thought this feature to aid in the process?  
Some times we had thought it would have been nice to see what the original length of something might have been, but to make it permanent gets unruly!

---

<div class="post-metadata">

**Author:** ![Istvan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/istvan/32/23668_2.png) [@Istvan](https://discourse.shapr3d.com/u/Istvan)\
**Post date:** [December 16, 2016, 8:24am UTC](https://discourse.shapr3d.com/t/new-version-2-0-1/624/18 "2016-12-16T08:24:41Z")

</div>

Both! We will automatically remove when you extrude, but you will be able to remove them manually as well.

---

<div class="post-metadata">

**Author:** ![PhotoWorkPlace](https://avatars.discourse-cdn.com/v4/letter/p/278dde/32.png) [@PhotoWorkPlace](https://discourse.shapr3d.com/u/PhotoWorkPlace)\
**Post date:** [December 16, 2016, 8:30am UTC](https://discourse.shapr3d.com/t/new-version-2-0-1/624/19 "2016-12-16T08:30:03Z")

</div>

Since we have you here! 🙂  
It would be a nice feature to be able to keep one finger on the screen while using the pen to rotate or move and object and while the finger is held down the object will jump or move in even increments  
Say 45° or .25"  
Even having a bit of a magnetic jump while bringing two objects together and you touch your other finger to the screen the might automatically align to centers  
Not sure if that makes sense, but we spend a lot of time going to the keypad to manually type 90° 🙂

---

<div class="post-metadata">

**Author:** ![Istvan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/istvan/32/23668_2.png) [@Istvan](https://discourse.shapr3d.com/u/Istvan)\
**Post date:** [December 16, 2016, 8:31am UTC](https://discourse.shapr3d.com/t/new-version-2-0-1/624/20 "2016-12-16T08:31:28Z")

</div>

> [@PhotoWorkPlace](#):
>
> It would be a nice feature to be able to keep one finger on the screen while using the pen to rotate or move and object and while the finger is held down the object will jump or move in even incrementsSay 45° or .25"Even having a bit of a magnetic jump while bringing two objects together and you touch your other finger to the screen the might automatically align to centersNot sure if that makes sense, but we spend a lot of time going to the keypad to manually type 90° 🙂

Maybe a shortcut for the most important angles? Buttons for 30, 45, 90, 120?

[Next page](https://discourse.shapr3d.com/t/new-version-2-0-1/624.md?page=2)