# Newbie Issues - Chamfer Edges

**URL:** <https://discourse.shapr3d.com/t/newbie-issues-chamfer-edges/35283>\
**Category:** Modeling Questions\
**Created:** [November 23, 2024, 9:37am UTC](https://discourse.shapr3d.com/t/newbie-issues-chamfer-edges/35283 "2024-11-23T09:37:10Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Psionw35](https://avatars.discourse-cdn.com/v4/letter/p/a6a055/32.png) [@Psionw35](https://discourse.shapr3d.com/u/Psionw35)\
**Post date:** [November 23, 2024, 9:37am UTC](https://discourse.shapr3d.com/t/newbie-issues-chamfer-edges/35283/1 "2024-11-23T09:37:10Z")

</div>

Apologies in advance but I am very new to 3D design and this is my first attempt at creating a project.

I am trying to chamfer the bottom edges of my design but cannot seem to get it how I want it. I want the chamfer to start 43mm in from the edge of the bottom and round to 35mm from the top edge on the front.

 ![IMG_4656](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/8/3/83a368de4fe81616fd6e0cba1e622d3aac5df6ac.jpeg)

Any guidance would be greatly appreciated.

Thanks

---

<div class="post-metadata">

**Author:** ![Oregonerd](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/oregonerd/32/8012_2.png) [@Oregonerd](https://discourse.shapr3d.com/u/Oregonerd)\
**Post date:** [November 23, 2024, 2:15pm UTC](https://discourse.shapr3d.com/t/newbie-issues-chamfer-edges/35283/2 "2024-11-23T14:15:08Z")

</div>

Can you mark up the image to help us see what you want? Coffee is just kicking in…