# Non-standard Chamfer

**URL:** <https://discourse.shapr3d.com/t/non-standard-chamfer/16837>\
**Category:** Modeling Questions\
**Created:** [January 12, 2022, 12:05am UTC](https://discourse.shapr3d.com/t/non-standard-chamfer/16837 "2022-01-12T00:05:11Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![KPeter](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/kpeter/32/7644_2.png) [@KPeter](https://discourse.shapr3d.com/u/KPeter)\
**Post date:** [January 12, 2022, 9:55am UTC](https://discourse.shapr3d.com/t/non-standard-chamfer/16837/2 "2022-01-12T09:55:56Z")

</div>

Hi! There is no regular chamfer too for this, but the result can be achieved by combining the Sweep or Subtract tools. There was a similar discussion not so long ago, let me share it here, I hope you will find it helpful:

> [@Chamfer Double Taper?](https://discourse.shapr3d.com/t/chamfer-double-taper/13956):
>
> Hi, I have a curve (part of a guitar body); and I want a deeper chamfer in the middle of the curve, and then I want it to taper on both ends of the curve. YES —- I saw previous posts; but these only show how to taper a chamfer on one end. I figured out how to scale ONE end and have the chamfer trim down to zero (see screen snapshot); but I want the chamfer to taper down on both ends. I kind of don’t want to redraw my whole body, and make it TWO bodies; because in the end, I’ll 3D print it, an…

---

_[View the full topic](https://discourse.shapr3d.com/t/non-standard-chamfer/16837)._