# Object pattern manipulation

**URL:** <https://discourse.shapr3d.com/t/object-pattern-manipulation/23630>\
**Category:** Modeling Questions\
**Created:** [January 17, 2023, 7:21pm UTC](https://discourse.shapr3d.com/t/object-pattern-manipulation/23630 "2023-01-17T19:21:30Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Barryd](https://avatars.discourse-cdn.com/v4/letter/b/edb3f5/32.png) [@Barryd](https://discourse.shapr3d.com/u/Barryd)\
**Post date:** [January 17, 2023, 7:21pm UTC](https://discourse.shapr3d.com/t/object-pattern-manipulation/23630/1 "2023-01-17T19:21:30Z")

</div>

Good eveningI made this pattern as per the attached photo.

After making the copies i realised that i needed to adjust the width of the parts but have to do it for each individual part.

Is it possible to adjust one part lets say the original part and have the rest of the copied parts then automatically adjust based on the dimensions of the first part

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/9/e/9eb7b070ff0b23aeebe31972f29a73ea9d6bdf8d.jpeg)

---

<div class="post-metadata">

**Author:** ![Matt\_the-Rathje](https://avatars.discourse-cdn.com/v4/letter/m/49beb7/32.png) [@Matt\_the-Rathje](https://discourse.shapr3d.com/u/Matt_the-Rathje)\
**Post date:** [January 17, 2023, 8:12pm UTC](https://discourse.shapr3d.com/t/object-pattern-manipulation/23630/2 "2023-01-17T20:12:59Z")

</div>

As there is no parametric pattern feature in Shapr3D yet, the answer is: No!  
After finishing the pattern-command you are left with the position of every body (I write body, because there are no parts and assemblies jet in Shapr3D).

---

<div class="post-metadata">

**Author:** ![Barryd](https://avatars.discourse-cdn.com/v4/letter/b/edb3f5/32.png) [@Barryd](https://discourse.shapr3d.com/u/Barryd)\
**Post date:** [January 17, 2023, 9:21pm UTC](https://discourse.shapr3d.com/t/object-pattern-manipulation/23630/3 "2023-01-17T21:21:15Z")

</div>

OK thanks for the reply