# Oblique cone

**URL:** <https://discourse.shapr3d.com/t/oblique-cone/24980>\
**Category:** Modeling Questions\
**Created:** [March 26, 2023, 4:49pm UTC](https://discourse.shapr3d.com/t/oblique-cone/24980 "2023-03-26T16:49:15Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mohsen1](https://avatars.discourse-cdn.com/v4/letter/m/ecae2f/32.png) [@Mohsen1](https://discourse.shapr3d.com/u/Mohsen1)\
**Post date:** [March 26, 2023, 4:49pm UTC](https://discourse.shapr3d.com/t/oblique-cone/24980/1 "2023-03-26T16:49:15Z")

</div>

I need to draw an oblique cone while keeping the base is circle as it should be but it did not work

---

<div class="post-metadata">

**Author:** ![TigerMike](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/tigermike/32/32650_2.png) [@TigerMike](https://discourse.shapr3d.com/u/TigerMike)\
**Post date:** [March 26, 2023, 5:03pm UTC](https://discourse.shapr3d.com/t/oblique-cone/24980/2 "2023-03-26T17:03:48Z")

</div>

Here’s a quick way.

---

<div class="post-metadata">

**Author:** ![Mohsen1](https://avatars.discourse-cdn.com/v4/letter/m/ecae2f/32.png) [@Mohsen1](https://discourse.shapr3d.com/u/Mohsen1)\
**Post date:** [March 26, 2023, 5:49pm UTC](https://discourse.shapr3d.com/t/oblique-cone/24980/3 "2023-03-26T17:49:20Z")

</div>

Thanks a lot teacher Tiger  
If you can help me find another way because I am working on cone sections  
So I need more accurate way especially with the head and axis of the cones

---

<div class="post-metadata">

**Author:** ![Stephen](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/stephen/32/16350_2.png) [@Stephen](https://discourse.shapr3d.com/u/Stephen)\
**Post date:** [March 26, 2023, 6:43pm UTC](https://discourse.shapr3d.com/t/oblique-cone/24980/4 "2023-03-26T18:43:43Z")

</div>

The Loft tool might be better, if you need more accuracy.

---

<div class="post-metadata">

**Author:** ![TigerMike](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/tigermike/32/32650_2.png) [@TigerMike](https://discourse.shapr3d.com/u/TigerMike)\
**Post date:** [March 26, 2023, 8:26pm UTC](https://discourse.shapr3d.com/t/oblique-cone/24980/5 "2023-03-26T20:26:52Z")

</div>

Here’s a more accurate method. Height is 10.01mm, bottom is 5mm radius. Angle to make oblique is 15°. Height of 7.5mm is arbritrary to get the 2.0096mm offset from the 15° angle.

Note: there is an anomaly if I make the sketch height 10mm and try to extend the truncated cone to 10mm. Some sort of internal math error. 10.01mm initial sketch height works when I extend to the physical 10mm height. Hope this helps.

[https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/d/e/de2f073b4929c9b38541868d23f6e75e9f7fc518.mov](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/d/e/de2f073b4929c9b38541868d23f6e75e9f7fc518.mov)

---

<div class="post-metadata">

**Author:** ![Mohsen1](https://avatars.discourse-cdn.com/v4/letter/m/ecae2f/32.png) [@Mohsen1](https://discourse.shapr3d.com/u/Mohsen1)\
**Post date:** [March 27, 2023, 3:03pm UTC](https://discourse.shapr3d.com/t/oblique-cone/24980/6 "2023-03-27T15:03:37Z")

</div>

Thank you very much teacher  
You save my time👍