# Physics and Mechanical Simulation

**URL:** <https://discourse.shapr3d.com/t/physics-and-mechanical-simulation/16044>\
**Category:** Modeling Questions\
**Created:** [November 25, 2021, 12:35pm UTC](https://discourse.shapr3d.com/t/physics-and-mechanical-simulation/16044 "2021-11-25T12:35:01Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![AdenRANA](https://avatars.discourse-cdn.com/v4/letter/a/9dc877/32.png) [@AdenRANA](https://discourse.shapr3d.com/u/AdenRANA)\
**Post date:** [November 25, 2021, 12:35pm UTC](https://discourse.shapr3d.com/t/physics-and-mechanical-simulation/16044/1 "2021-11-25T12:35:01Z")

</div>

Hello everyone,

I’m new on Shapr3D, I have a question about some functionalities. Can we simulate strain or stress appli es on solid, or we can just create the geometry of a solid ?

---

<div class="post-metadata">

**Author:** ![Maksiuhrino](https://avatars.discourse-cdn.com/v4/letter/m/cdc98d/32.png) [@Maksiuhrino](https://discourse.shapr3d.com/u/Maksiuhrino)\
**Post date:** [April 29, 2025, 12:41pm UTC](https://discourse.shapr3d.com/t/physics-and-mechanical-simulation/16044/2 "2025-04-29T12:41:45Z")

</div>

I also don’t know. Tutorials are awesome, but something in it is off.

---

<div class="post-metadata">

**Author:** ![Xdrakosha](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/xdrakosha/32/24881_2.png) [@Xdrakosha](https://discourse.shapr3d.com/u/Xdrakosha)\
**Post date:** [April 29, 2025, 12:49pm UTC](https://discourse.shapr3d.com/t/physics-and-mechanical-simulation/16044/3 "2025-04-29T12:49:50Z")

</div>

I would recommend to read manual where you can find description of all available functions.

---

<div class="post-metadata">

**Author:** ![shaprvision](https://avatars.discourse-cdn.com/v4/letter/s/4491bb/32.png) [@shaprvision](https://discourse.shapr3d.com/u/shaprvision)\
**Post date:** [April 29, 2025, 1:57pm UTC](https://discourse.shapr3d.com/t/physics-and-mechanical-simulation/16044/4 "2025-04-29T13:57:38Z")

</div>

No, you can’t simulate strain or stresses shapr3d currently. You can export to a format that you could load into another tool for analysis (e.g. STEP format and FreeCAD with the FEM module).