# Pi Cam Studio

**URL:** <https://discourse.shapr3d.com/t/pi-cam-studio/4369>\
**Category:** Share your creations\
**Created:** [March 23, 2019, 3:52pm UTC](https://discourse.shapr3d.com/t/pi-cam-studio/4369 "2019-03-23T15:52:41Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![rubillos](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/rubillos/32/3507_2.png) [@rubillos](https://discourse.shapr3d.com/u/rubillos)\
**Post date:** [March 23, 2019, 3:52pm UTC](https://discourse.shapr3d.com/t/pi-cam-studio/4369/1 "2019-03-23T15:52:41Z")

</div>

As part of learning Shapr3D and setting up a new 3D printer, I designed this. The box at the bottom holds a Raspberry Pi that controls the printer. A camera to monitor the printer remotely is contained in the stylized camera on the tripod, and LED lights are held in place by the trusses and lighting cans. There’s even an embossed woodgrain pattern on the “floor”. Fun and functional!

![IMG_0506](https://cdck-file-uploads-us1.s3.dualstack.us-west-2.amazonaws.com/flex002/uploads/shapr3d/original/2X/1/1b9b6279b4d8f35d1946d59111f2e20ea9bcef27.jpeg)

![IMG_0505](https://cdck-file-uploads-us1.s3.dualstack.us-west-2.amazonaws.com/flex002/uploads/shapr3d/original/2X/4/4158a80fdc2bf0df4eb2c564e92d533af7618fe9.jpeg)

![IMG_0507](https://cdck-file-uploads-us1.s3.dualstack.us-west-2.amazonaws.com/flex002/uploads/shapr3d/original/2X/2/2a3fef49d398892256d41dbf915b58a8eb1eda9b.png)

---

<div class="post-metadata">

**Author:** ![Romulus369](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/romulus369/32/2871_2.png) [@Romulus369](https://discourse.shapr3d.com/u/Romulus369)\
**Post date:** [March 23, 2019, 4:34pm UTC](https://discourse.shapr3d.com/t/pi-cam-studio/4369/2 "2019-03-23T16:34:46Z")

</div>

Absolutely hands down fantastic job!!! Very well done!!! 👍🏻🕶