# Please somebody help me😢

**URL:** <https://discourse.shapr3d.com/t/please-somebody-help-me/37875>\
**Category:** Share your creations\
**Created:** [May 9, 2025, 2:00pm UTC](https://discourse.shapr3d.com/t/please-somebody-help-me/37875 "2025-05-09T14:00:33Z")\
**Posts on this page:** 11\
**Page:** 1

<div class="post-metadata">

**Author:** ![WhateverNUR](https://avatars.discourse-cdn.com/v4/letter/w/9f8e36/32.png) [@WhateverNUR](https://discourse.shapr3d.com/u/WhateverNUR)\
**Post date:** [May 9, 2025, 2:00pm UTC](https://discourse.shapr3d.com/t/please-somebody-help-me/37875/1 "2025-05-09T14:00:34Z")

</div>

_ **Is there a method to bend irregularly shaped flat plates?** _  
**I beg for someone to help me！！！**

 ![e7](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/5/e/5e900ec1143116db5b4c142b638b40a154660546.jpeg)

---

<div class="post-metadata">

**Author:** ![Xdrakosha](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/xdrakosha/32/24881_2.png) [@Xdrakosha](https://discourse.shapr3d.com/u/Xdrakosha)\
**Post date:** [May 9, 2025, 2:21pm UTC](https://discourse.shapr3d.com/t/please-somebody-help-me/37875/2 "2025-05-09T14:21:20Z")

</div>

Shapr3D work with solid bodies. You can’t bend them because they are “solid”. But you can design them bended as you need.

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/b/3/b3c357165373ba3d3d7e6aad1e5e692106d3fe45.jpeg)  
 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/c/7/c73e362c0a527915228b30238507d1df802157e7.jpeg)

P.S. If be honest there is a way you can deform body but it is too hard for most people to understand how to use it. You can use move tool on edges and you can make any edge on surface by projecting it.

Quick example

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/9/8/981c21e46dd85c62eb8692400a229af719522634.jpeg)

---

<div class="post-metadata">

**Author:** ![WhateverNUR](https://avatars.discourse-cdn.com/v4/letter/w/9f8e36/32.png) [@WhateverNUR](https://discourse.shapr3d.com/u/WhateverNUR)\
**Post date:** [May 10, 2025, 7:46am UTC](https://discourse.shapr3d.com/t/please-somebody-help-me/37875/3 "2025-05-10T07:46:18Z")

</div>

_How was this sketch made? The images I uploaded earlier were sourced from the internet and were not created by me. If it is convenient for you, could you please teach me? I would greatly appreciate it._

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/c/7/c73e362c0a527915228b30238507d1df802157e7.jpeg)

---

<div class="post-metadata">

**Author:** ![Xdrakosha](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/xdrakosha/32/24881_2.png) [@Xdrakosha](https://discourse.shapr3d.com/u/Xdrakosha)\
**Post date:** [May 10, 2025, 7:52am UTC](https://discourse.shapr3d.com/t/please-somebody-help-me/37875/4 "2025-05-10T07:52:25Z")

</div>

I will show a little bit later, when I come back from dog walk.

---

<div class="post-metadata">

**Author:** ![Xdrakosha](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/xdrakosha/32/24881_2.png) [@Xdrakosha](https://discourse.shapr3d.com/u/Xdrakosha)\
**Post date:** [May 10, 2025, 9:54am UTC](https://discourse.shapr3d.com/t/please-somebody-help-me/37875/5 "2025-05-10T09:54:31Z")

</div>

To make this kind of spiring you need to draw appropriate sketch.

First draw a spring using arc tool:

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/4/6/46b6d590401ec1bd8586936443b42f3db7ba0f6d.png)

Then using previous spring as a guide draw wave-shaped line:

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/b/a/bade38efedb474f7d2b7c2a72a178e9217ee7628.png)

Next step is using offset tool and make a copy of previous form:

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/6/1/61e1014bb15864f4412b288f02eb4363c477980e.png)

After that all you need is to extrude from sketch:

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/7/f/7fe1f416ab681b456a034dd4a4250012d56e9771.jpeg)

Dont forget to close the sketch loop before extrusion.

---

<div class="post-metadata">

**Author:** ![WhateverNUR](https://avatars.discourse-cdn.com/v4/letter/w/9f8e36/32.png) [@WhateverNUR](https://discourse.shapr3d.com/u/WhateverNUR)\
**Post date:** [May 11, 2025, 4:39am UTC](https://discourse.shapr3d.com/t/please-somebody-help-me/37875/6 "2025-05-11T04:39:43Z")

</div>

_I sincerely appreciate your invaluable assistance._

---

<div class="post-metadata">

**Author:** ![jean-philippe2](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/jean-philippe2/32/27353_2.png) [@jean-philippe2](https://discourse.shapr3d.com/u/jean-philippe2)\
**Post date:** [May 11, 2025, 8:06am UTC](https://discourse.shapr3d.com/t/please-somebody-help-me/37875/7 "2025-05-11T08:06:39Z")

</div>

Hi [Xdrakosha](https://discourse.shapr3d.com/u/Xdrakosha),  
How did you do the circles along the path ?  
Thanks  
[![](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/b/a/bade38efedb474f7d2b7c2a72a178e9217ee7628.png) ](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/b/a/bade38efedb474f7d2b7c2a72a178e9217ee7628.png)

---

<div class="post-metadata">

**Author:** ![Xdrakosha](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/xdrakosha/32/24881_2.png) [@Xdrakosha](https://discourse.shapr3d.com/u/Xdrakosha)\
**Post date:** [May 11, 2025, 8:23am UTC](https://discourse.shapr3d.com/t/please-somebody-help-me/37875/8 "2025-05-11T08:23:30Z")

</div>

> [@jean-philippe2](#):
>
> How did you do the circles along the path ?

Arc tool and constraints.

---

<div class="post-metadata">

**Author:** ![jean-philippe2](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/jean-philippe2/32/27353_2.png) [@jean-philippe2](https://discourse.shapr3d.com/u/jean-philippe2)\
**Post date:** [May 11, 2025, 10:28am UTC](https://discourse.shapr3d.com/t/please-somebody-help-me/37875/9 "2025-05-11T10:28:04Z")

</div>

one by one ? 🫩

---

<div class="post-metadata">

**Author:** ![Xdrakosha](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/xdrakosha/32/24881_2.png) [@Xdrakosha](https://discourse.shapr3d.com/u/Xdrakosha)\
**Post date:** [May 11, 2025, 11:06am UTC](https://discourse.shapr3d.com/t/please-somebody-help-me/37875/10 "2025-05-11T11:06:03Z")

</div>

Yes. Unfortunately we don’t have tool to make pattern by path yet.

---

<div class="post-metadata">

**Author:** ![jean-philippe2](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/jean-philippe2/32/27353_2.png) [@jean-philippe2](https://discourse.shapr3d.com/u/jean-philippe2)\
**Post date:** [May 11, 2025, 11:08am UTC](https://discourse.shapr3d.com/t/please-somebody-help-me/37875/11 "2025-05-11T11:08:25Z")

</div>

> [@Xdrakosha](#):
>
> Unfortunately we don’t have tool to make pattern by path yet.

Yes, sure.  
Thanks.