# Project fail

**URL:** <https://discourse.shapr3d.com/t/project-fail/5459>\
**Category:** Modeling Questions\
**Created:** [August 26, 2019, 3:23pm UTC](https://discourse.shapr3d.com/t/project-fail/5459 "2019-08-26T15:23:47Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Sketcherq8](https://avatars.discourse-cdn.com/v4/letter/s/e8c25b/32.png) [@Sketcherq8](https://discourse.shapr3d.com/u/Sketcherq8)\
**Post date:** [August 26, 2019, 3:23pm UTC](https://discourse.shapr3d.com/t/project-fail/5459/1 "2019-08-26T15:23:48Z")

</div>

Hello I’m trying to project but I got project fail!  
I try on top on right half project is sketch

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/d/d1a83006a621d7f171bc97b031142e62e98b32b2.jpeg)

---

<div class="post-metadata">

**Author:** ![Victor\_Shapr3D](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/victor_shapr3d/32/3502_2.png) [@Victor\_Shapr3D](https://discourse.shapr3d.com/u/Victor_Shapr3D)\
**Post date:** [August 26, 2019, 3:31pm UTC](https://discourse.shapr3d.com/t/project-fail/5459/2 "2019-08-26T15:31:03Z")

</div>

Hi, it’s only possible to project a sketch on planar bodies. Select the “Edges” project option instead while projecting the sketch and that should work 🙂

---

<div class="post-metadata">

**Author:** ![Sketcherq8](https://avatars.discourse-cdn.com/v4/letter/s/e8c25b/32.png) [@Sketcherq8](https://discourse.shapr3d.com/u/Sketcherq8)\
**Post date:** [August 26, 2019, 4:22pm UTC](https://discourse.shapr3d.com/t/project-fail/5459/3 "2019-08-26T16:22:01Z")

</div>

Hello, I try on sketch and on edges same problem project fail

---

<div class="post-metadata">

**Author:** ![Victor\_Shapr3D](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/victor_shapr3d/32/3502_2.png) [@Victor\_Shapr3D](https://discourse.shapr3d.com/u/Victor_Shapr3D)\
**Post date:** [August 26, 2019, 6:56pm UTC](https://discourse.shapr3d.com/t/project-fail/5459/4 "2019-08-26T18:56:56Z")

</div>

Hi, thanks for your response. Please send us the design file via [support@shapr3d.com](mailto:support@shapr3d.com). We will further investigate the issue from here and then get back to you.

---

<div class="post-metadata">

**Author:** ![Sketcherq8](https://avatars.discourse-cdn.com/v4/letter/s/e8c25b/32.png) [@Sketcherq8](https://discourse.shapr3d.com/u/Sketcherq8)\
**Post date:** [August 26, 2019, 8:29pm UTC](https://discourse.shapr3d.com/t/project-fail/5459/5 "2019-08-26T20:29:06Z")

</div>

Thanks bro