# Projections changes in the Parametric Modeling release?

**URL:** <https://discourse.shapr3d.com/t/projections-changes-in-the-parametric-modeling-release/31356>\
**Category:** Modeling Questions\
**Created:** [April 20, 2024, 2:15pm UTC](https://discourse.shapr3d.com/t/projections-changes-in-the-parametric-modeling-release/31356 "2024-04-20T14:15:48Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![MandoMatt](https://avatars.discourse-cdn.com/v4/letter/m/a87d85/32.png) [@MandoMatt](https://discourse.shapr3d.com/u/MandoMatt)\
**Post date:** [April 20, 2024, 2:52pm UTC](https://discourse.shapr3d.com/t/projections-changes-in-the-parametric-modeling-release/31356/3 "2024-04-20T14:52:59Z")

</div>

Thanks or the reply, @Istvan! I truly appreciate your help, but I don’t fully understand “sketch mode” in this specific context:

> …you just need to initiate the project tool from sketch mode

If I’m actively within a sketch (_i.e._ I can see the line, arc, spline, etc. options), I can’t project onto a _ **different** _ sketch. In fact, the other sketch disappears from the item list:

![In sketch mode](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/9/7/9732d631a22c7374cc04f3ba4658db54a535f5e8.gif)

Unless you mean to ensure “Edges” are not selected as an option when projecting overall. In the two scenarios from my original post, “Sketches” were selected:

 ![Sketch mode projection](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/e/0/e056abe969b5a9739891ca90953e61ae67400b5b.png)

---

_[View the full topic](https://discourse.shapr3d.com/t/projections-changes-in-the-parametric-modeling-release/31356)._