# Pulley wheel

**URL:** https://discourse.shapr3d.com/t/pulley-wheel/35160
**Category:** Modeling Questions
**Created:** [November 14, 2024, 6:16pm UTC](https://discourse.shapr3d.com/t/pulley-wheel/35160 "2024-11-14T18:16:40Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![Dragoon6](https://avatars.discourse-cdn.com/v4/letter/d/a88e4f/32.png) [@Dragoon6](https://discourse.shapr3d.com/u/Dragoon6)
#### Post date: [November 14, 2024, 6:16pm UTC](https://discourse.shapr3d.com/t/pulley-wheel/35160/1 "2024-11-14T18:16:40Z")

</div>

Hello I’m trying to make a pulley wheel with a internal v shape curve any help would be great.

---

<div class="post-metadata">

### Author: ![TheBum](https://avatars.discourse-cdn.com/v4/letter/t/eada6e/32.png) [@TheBum](https://discourse.shapr3d.com/u/TheBum)
#### Post date: [November 14, 2024, 6:46pm UTC](https://discourse.shapr3d.com/t/pulley-wheel/35160/2 "2024-11-14T18:46:13Z")

</div>

Draw the cross-section of the pulley from the center to the outer rim and then use the Revolve tool to revolve that cross-section around the center point.

---

<div class="post-metadata">

### Author: ![TigerMike](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/tigermike/32/32650_2.png) [@TigerMike](https://discourse.shapr3d.com/u/TigerMike)
#### Post date: [November 20, 2024, 3:41pm UTC](https://discourse.shapr3d.com/t/pulley-wheel/35160/4 "2024-11-20T15:41:55Z")

</div>

Do what @TheBum suggested, like this…