# Question about sweeping along multileg path

**URL:** <https://discourse.shapr3d.com/t/question-about-sweeping-along-multileg-path/37298>\
**Category:** Modeling Questions\
**Created:** [March 29, 2025, 8:26pm UTC](https://discourse.shapr3d.com/t/question-about-sweeping-along-multileg-path/37298 "2025-03-29T20:26:16Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![R.S](https://avatars.discourse-cdn.com/v4/letter/r/90db22/32.png) [@R.S](https://discourse.shapr3d.com/u/R.S)\
**Post date:** [March 29, 2025, 8:26pm UTC](https://discourse.shapr3d.com/t/question-about-sweeping-along-multileg-path/37298/1 "2025-03-29T20:26:16Z")

</div>

Hi,

when using sweep along a path that is made out of several sub-parts (lines, curves etc., all connected!!!) the resulting body shows black lines where the connections in the path are. Can that be changed?

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/4/5/4522f16f1c9da78b216750fa5c93138b50c2e9a0.jpeg)

---

<div class="post-metadata">

**Author:** ![SCALEMODEL](https://avatars.discourse-cdn.com/v4/letter/s/77aa72/32.png) [@SCALEMODEL](https://discourse.shapr3d.com/u/SCALEMODEL)\
**Post date:** [March 30, 2025, 12:16am UTC](https://discourse.shapr3d.com/t/question-about-sweeping-along-multileg-path/37298/2 "2025-03-30T00:16:48Z")

</div>

If you do multi segmented sweep, if it wasn’t a continuous line without breaks you get those disconnected lines, I don’t think you can get rid of it and as long as the lines don’t show up in Visualize mode its ok.

So could minimize those lines if we had Real 3D sketch with fully continuing lines like in Rhino3d.

 ![Pasted Graphic 2](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/5/f/5f8644a059e338183d000424b80468b41e39b4af.jpeg)

Sometimes I do 3d Sketch in Rhino and export/import as IGES, it brings in as sketch.

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/3/d/3d29f30c765a6802c7067cea5d5fac04f29fabf6.jpeg)

---

<div class="post-metadata">

**Author:** ![R.S](https://avatars.discourse-cdn.com/v4/letter/r/90db22/32.png) [@R.S](https://discourse.shapr3d.com/u/R.S)\
**Post date:** [March 30, 2025, 2:20pm UTC](https://discourse.shapr3d.com/t/question-about-sweeping-along-multileg-path/37298/3 "2025-03-30T14:20:42Z")

</div>

That’s a very clever idea! Thank you for that!!