# Railing, Pipe 45 degress Design
**URL:** https://discourse.shapr3d.com/t/railing-pipe-45-degress-design/18103
**Category:** Modeling Questions
**Created:** [March 18, 2022, 4:57am UTC](https://discourse.shapr3d.com/t/railing-pipe-45-degress-design/18103 "2022-03-18T04:57:19Z")
**Posts on this page:** 19
**Page:** 1
### Author:  [@SiDaWelding](https://discourse.shapr3d.com/u/SiDaWelding)
#### Post date: [March 18, 2022, 4:57am UTC](https://discourse.shapr3d.com/t/railing-pipe-45-degress-design/18103/1 "2022-03-18T04:57:19Z")
Hallo
I want to design a Railing. I am absoult new in this program. So I Need help.
I Need to do on a Tube a 45 degress cut.
Can u help me pls ?
Like on this picture the post to the wall.
Thank you
---
### Author:  [@Sebestyen](https://discourse.shapr3d.com/u/Sebestyen)
#### Post date: [March 18, 2022, 1:00pm UTC](https://discourse.shapr3d.com/t/railing-pipe-45-degress-design/18103/2 "2022-03-18T13:00:03Z")
Hey @SiDaWelding! Welcome to our community!
The railing you have described usually consists of two tubes perpendicular to each other. You will have to cut them at a 45 degree angle by making a sketch with this angle.
Then, you should subtract this 45 degree face from the tube to get a clean cut.
When you have one tube cut, just enable the Copy Badge and turn it 90 degrees to have another tube piece you can align to the first one, then use the “ **Align** ” tool to properly set it to its correct position.
Please also take a look at out [Shapr3D Help Desk](https://support.shapr3d.com/hc/en-us) to find out more about the basics of Shapr3D.
---
### Author:  [@SiDaWelding](https://discourse.shapr3d.com/u/SiDaWelding)
#### Post date: [March 18, 2022, 7:42pm UTC](https://discourse.shapr3d.com/t/railing-pipe-45-degress-design/18103/3 "2022-03-18T19:42:49Z")
Ok thank you I will try it.
---
### Author:  [@TigerMike](https://discourse.shapr3d.com/u/TigerMike)
#### Post date: [March 18, 2022, 9:48pm UTC](https://discourse.shapr3d.com/t/railing-pipe-45-degress-design/18103/4 "2022-03-18T21:48:41Z")
Is this what you want to achieve?
---
### Author:  [@PEC](https://discourse.shapr3d.com/u/PEC)
#### Post date: [March 19, 2022, 1:23am UTC](https://discourse.shapr3d.com/t/railing-pipe-45-degress-design/18103/5 "2022-03-19T01:23:26Z")
Or just that, based on the picture you provided and @Sebestyen’s explanations?
---
### Author:  [@TigerMike](https://discourse.shapr3d.com/u/TigerMike)
#### Post date: [March 19, 2022, 3:41am UTC](https://discourse.shapr3d.com/t/railing-pipe-45-degress-design/18103/6 "2022-03-19T03:41:21Z")
And, here’s yet another method.
[https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/9/9e0f40592ec4b1bad04a2dca350a806a13c873ac.mov](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/9/9e0f40592ec4b1bad04a2dca350a806a13c873ac.mov)
---
### Author:  [@SiDaWelding](https://discourse.shapr3d.com/u/SiDaWelding)
#### Post date: [March 19, 2022, 5:50am UTC](https://discourse.shapr3d.com/t/railing-pipe-45-degress-design/18103/7 "2022-03-19T05:50:30Z")
Yes this is what i want to do, thank you very much.
---
### Author:  [@SiDaWelding](https://discourse.shapr3d.com/u/SiDaWelding)
#### Post date: [March 19, 2022, 5:53am UTC](https://discourse.shapr3d.com/t/railing-pipe-45-degress-design/18103/8 "2022-03-19T05:53:30Z")
Very nice! Thank you. This is a very nice Community!! Thank to all who helps me!!
---
### Author:  [@PEC](https://discourse.shapr3d.com/u/PEC)
#### Post date: [March 19, 2022, 11:09am UTC](https://discourse.shapr3d.com/t/railing-pipe-45-degress-design/18103/9 "2022-03-19T11:09:09Z")
Thanks for your message Daniel @SiDaWelding.
Also a very nice method shared by @alaayed is shown at [Garden gate with sloping - #11 by alaayed](https://discourse.shapr3d.com/t/garden-gate-with-sloping/18107/11)
This is one of the cool things with 3D modeling and Shapr3D: there are almost always various ways to do it😁
---
### Author:  [@Romulus369](https://discourse.shapr3d.com/u/Romulus369)
#### Post date: [March 19, 2022, 11:43am UTC](https://discourse.shapr3d.com/t/railing-pipe-45-degress-design/18103/10 "2022-03-19T11:43:45Z")
That’s Life PEC!!! 🐢🐸🐝
---
### Author:  [@Msmetalmagic](https://discourse.shapr3d.com/u/Msmetalmagic)
#### Post date: [March 19, 2022, 1:26pm UTC](https://discourse.shapr3d.com/t/railing-pipe-45-degress-design/18103/11 "2022-03-19T13:26:46Z")
I really needed to see this. Thank you
---
### Author:  [@SiDaWelding](https://discourse.shapr3d.com/u/SiDaWelding)
#### Post date: [March 20, 2022, 11:52am UTC](https://discourse.shapr3d.com/t/railing-pipe-45-degress-design/18103/12 "2022-03-20T11:52:27Z")
Thank for your help, this is my result
---
### Author:  [@Msmetalmagic](https://discourse.shapr3d.com/u/Msmetalmagic)
#### Post date: [March 22, 2022, 2:33pm UTC](https://discourse.shapr3d.com/t/railing-pipe-45-degress-design/18103/13 "2022-03-22T14:33:02Z")
Are you going to fabricate this railing?
---
### Author:  [@SiDaWelding](https://discourse.shapr3d.com/u/SiDaWelding)
#### Post date: [March 26, 2022, 8:47pm UTC](https://discourse.shapr3d.com/t/railing-pipe-45-degress-design/18103/14 "2022-03-26T20:47:16Z")
Yes I, I think for my customers its easyer to understand hie it will Look like 🙂
---
### Author:  [@bobsammer](https://discourse.shapr3d.com/u/bobsammer)
#### Post date: [December 19, 2023, 3:29am UTC](https://discourse.shapr3d.com/t/railing-pipe-45-degress-design/18103/15 "2023-12-19T03:29:17Z")
I am also a beginner to shapr3D, and I find a lot of benefit reading about solutions in these forums. I don’t want to sound critical or ungrateful, but for those of you that post solutions using shapr3D software, would it be possible for you to slow down the time between pen clicks or your keystrokes, so those beginners in the crowd can become familiar with the commands you’re using and how you’re using them? I have to say that in some cases they’re just way too fast and I have to play them over 20 times to figure it out.
Thanks to everyone.
---
### Author:  [@Bob3DPO](https://discourse.shapr3d.com/u/Bob3DPO)
#### Post date: [December 19, 2023, 4:08am UTC](https://discourse.shapr3d.com/t/railing-pipe-45-degress-design/18103/16 "2023-12-19T04:08:48Z")
Have you reduced the playback speed?
@TigerMike makes some of the best videos in this community space. On some of the vids I’ve made, it is necessary to reduce resolution and trim out unnecessary pauses to make it so it can be uploaded as there is a max size.
---
### Author:  [@bobsammer](https://discourse.shapr3d.com/u/bobsammer)
#### Post date: [December 19, 2023, 5:25am UTC](https://discourse.shapr3d.com/t/railing-pipe-45-degress-design/18103/17 "2023-12-19T05:25:43Z")
I have not reduced playback speed because I don’t know how to do that on ky iPad.
Bob’s iPhone
---
### Author:  [@Bob3DPO](https://discourse.shapr3d.com/u/Bob3DPO)
#### Post date: [December 19, 2023, 6:00am UTC](https://discourse.shapr3d.com/t/railing-pipe-45-degress-design/18103/18 "2023-12-19T06:00:34Z")
There is a little control in the lower right of the video player.
---
### Author:  [@bobsammer](https://discourse.shapr3d.com/u/bobsammer)
#### Post date: [December 19, 2023, 12:51pm UTC](https://discourse.shapr3d.com/t/railing-pipe-45-degress-design/18103/19 "2023-12-19T12:51:03Z")
Thank you!
Bob