# Ramp on rounded segment

**URL:** <https://discourse.shapr3d.com/t/ramp-on-rounded-segment/26565>\
**Category:** Modeling Questions\
**Created:** [July 3, 2023, 3:18pm UTC](https://discourse.shapr3d.com/t/ramp-on-rounded-segment/26565 "2023-07-03T15:18:12Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Sammy1](https://avatars.discourse-cdn.com/v4/letter/s/bb73d2/32.png) [@Sammy1](https://discourse.shapr3d.com/u/Sammy1)\
**Post date:** [July 3, 2023, 3:18pm UTC](https://discourse.shapr3d.com/t/ramp-on-rounded-segment/26565/1 "2023-07-03T15:18:12Z")

</div>

Dear Community,  
I would like to create a kind of “ramp” on this rounded segment with the center in the origin (see first screenshot).

From the side it should look like in screenshot two. However, if I use a plane like in screenshot three (red arrow), the end (green arrow) is not rotationally symmetrical to the origin corresponding to the rounded segment.

Maybe some elementary basics are missing here, but could someone help me how to achieve this? Where do I need to draw in my plane and have it rotate around what point?

Thanks a lot!

 ![Picture 1](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/6/8/68eef447bb68e9d8ab176c4896a6412fefbed8d8.jpeg)

 ![Picture 2](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/4/8/4819475c1c3f0de0cbeb3b8972ba341036b7bdf8.png)

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/c/c/ccd919c70d2996e2c38f7f5f2ffcba57ebfdc6e6.jpeg)

---

<div class="post-metadata">

**Author:** ![TigerMike](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/tigermike/32/32650_2.png) [@TigerMike](https://discourse.shapr3d.com/u/TigerMike)\
**Post date:** [July 3, 2023, 3:45pm UTC](https://discourse.shapr3d.com/t/ramp-on-rounded-segment/26565/2 "2023-07-03T15:45:02Z")

</div>

Is this what you’re trying to do?

---

<div class="post-metadata">

**Author:** ![Sammy1](https://avatars.discourse-cdn.com/v4/letter/s/bb73d2/32.png) [@Sammy1](https://discourse.shapr3d.com/u/Sammy1)\
**Post date:** [July 4, 2023, 5:27am UTC](https://discourse.shapr3d.com/t/ramp-on-rounded-segment/26565/3 "2023-07-04T05:27:37Z")

</div>

That was excatly what I was looking for, sometimes you are blinded by simplicity. Thank you so much sir!