# Recreating Table Design in 3d
**URL:** https://discourse.shapr3d.com/t/recreating-table-design-in-3d/37468
**Category:** Modeling Questions
**Created:** [April 12, 2025, 8:50pm UTC](https://discourse.shapr3d.com/t/recreating-table-design-in-3d/37468 "2025-04-12T20:50:57Z")
**Posts on this page:** 13
**Page:** 1
### Author:  [@BenSiato](https://discourse.shapr3d.com/u/BenSiato)
#### Post date: [April 12, 2025, 8:50pm UTC](https://discourse.shapr3d.com/t/recreating-table-design-in-3d/37468/1 "2025-04-12T20:50:57Z")
Hi… I saw a beautiful table build on Instagram here:
> **[Mitch Polley Design on Instagram: "Making a June side table in British Ash...](https://www.instagram.com/reel/DH8NyBHCHGX/)**
>
> 1,760 likes, 38 comments - mitchpolleydesign on April 2, 2025: "Making a June side table in British Ash
>
> Each table is handmade to order, dimensions and wood species can be customised.
>
> What wood would you chose? 🪵
>
> Head over to my page to see the...
I have pretty much figured out how to design everything. But the legs. They become smaller going down to the floor. They have three sides rounded differently and the inner side has a special cut.
Any help would be much appreciated.
Best
Ben
---
### Author:  [@Andreas](https://discourse.shapr3d.com/u/Andreas)
#### Post date: [April 12, 2025, 10:03pm UTC](https://discourse.shapr3d.com/t/recreating-table-design-in-3d/37468/2 "2025-04-12T22:03:47Z")
Sali @BenSiato
One idea is to ask the manufacturer how he did it.
Most people answer very friendly, in my experience.
Ps: it’s best if you realize your own ideas.
Mit freundlichen Grüssen
Andreas Desiderius Haudenschild
Here you have another book tip for wood connections:
---
### Author:  [@TigerMike](https://discourse.shapr3d.com/u/TigerMike)
#### Post date: [April 13, 2025, 1:41am UTC](https://discourse.shapr3d.com/t/recreating-table-design-in-3d/37468/3 "2025-04-13T01:41:37Z")
To me it looks like the leg is tapered on the inner two sides. I used 2.5° taper. The outside corner has a nice radius. Can’t see the special cut from the video.
---
### Author:  [@BenSiato](https://discourse.shapr3d.com/u/BenSiato)
#### Post date: [April 13, 2025, 6:03am UTC](https://discourse.shapr3d.com/t/recreating-table-design-in-3d/37468/4 "2025-04-13T06:03:13Z")
Thanks Andreas. I’m actually using the design to practice Shapr3D 🙂 Will have a look and the book. Seems like one of those must-haves for the bookshelf in the woodworking shop. 👍
---
### Author:  [@Andreas](https://discourse.shapr3d.com/u/Andreas)
#### Post date: [April 13, 2025, 6:20am UTC](https://discourse.shapr3d.com/t/recreating-table-design-in-3d/37468/5 "2025-04-13T06:20:31Z")
@BenSiato
Please, for me personally the book is still interesting
Mit freundlichen Grüssen
Andreas Desiderius Haudenschild
---
### Author:  [@Andreas](https://discourse.shapr3d.com/u/Andreas)
#### Post date: [April 14, 2025, 6:21pm UTC](https://discourse.shapr3d.com/t/recreating-table-design-in-3d/37468/6 "2025-04-14T18:21:02Z")
Sali @BenSiato @TigerMike
I tried it once
PS: Thanks Ben now I have loft function endest which is useful for me.
Mit freundlichen Grüssen
Andreas Desiderius Haudenschild
---
### Author:  [@Andreas](https://discourse.shapr3d.com/u/Andreas)
#### Post date: [April 14, 2025, 8:00pm UTC](https://discourse.shapr3d.com/t/recreating-table-design-in-3d/37468/7 "2025-04-14T20:00:11Z")
Sali @BenSiato @TigerMike
I have another option.
There is also the possibility to work with axes and with the subtract tool.
I added a few pictures for this.
Mit freundlichen Grüssen
Andreas Desiderius Haudenschild
---
### Author:  [@Andreas](https://discourse.shapr3d.com/u/Andreas)
#### Post date: [April 14, 2025, 8:50pm UTC](https://discourse.shapr3d.com/t/recreating-table-design-in-3d/37468/8 "2025-04-14T20:50:18Z")
Sali @TigerMike @BenSiato
Here I have another version with construction level And share:
Mit freundlichen Grüssen
Andreas Desiderius Haudenschild
---
### Author:  [@SCALEMODEL](https://discourse.shapr3d.com/u/SCALEMODEL)
#### Post date: [April 15, 2025, 8:19am UTC](https://discourse.shapr3d.com/t/recreating-table-design-in-3d/37468/9 "2025-04-15T08:19:54Z")
Here is the loft version.
From the TOP
---
### Author:  [@Andreas](https://discourse.shapr3d.com/u/Andreas)
#### Post date: [April 15, 2025, 9:44am UTC](https://discourse.shapr3d.com/t/recreating-table-design-in-3d/37468/10 "2025-04-15T09:44:17Z")
Sali @SCALEMODEL @BenSiato
Another version
Mit freundlichen Grüssen
Andreas Desiderius Haudenschild
---
### Author:  [@SCALEMODEL](https://discourse.shapr3d.com/u/SCALEMODEL)
#### Post date: [April 15, 2025, 10:37am UTC](https://discourse.shapr3d.com/t/recreating-table-design-in-3d/37468/11 "2025-04-15T10:37:55Z")
I refined it.
Here what the sketch looks like top and bottom you would just need to loft it. If you use constraints it will be easier to shape it correctly and adjust it by eye to compare with the photo by inputing dimensions.
---
### Author:  [@SCALEMODEL](https://discourse.shapr3d.com/u/SCALEMODEL)
#### Post date: [April 15, 2025, 4:41pm UTC](https://discourse.shapr3d.com/t/recreating-table-design-in-3d/37468/12 "2025-04-15T16:41:54Z")
Since I made the legs anyways I thought just finish it. I also liked the brown version.
---
### Author:  [@BenSiato](https://discourse.shapr3d.com/u/BenSiato)
#### Post date: [April 15, 2025, 7:54pm UTC](https://discourse.shapr3d.com/t/recreating-table-design-in-3d/37468/13 "2025-04-15T19:54:22Z")
Thank you guys. I ultimately went with Loft & Extrude the top part. Looks pretty much like it should. Now I’ll have to catch up with @SCALEMODEL . Nice Work!
