# Removing part from tube precisely

**URL:** <https://discourse.shapr3d.com/t/removing-part-from-tube-precisely/21016>\
**Category:** Modeling Questions\
**Created:** [August 21, 2022, 8:20am UTC](https://discourse.shapr3d.com/t/removing-part-from-tube-precisely/21016 "2022-08-21T08:20:34Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Horsthorst](https://avatars.discourse-cdn.com/v4/letter/h/b9bd4f/32.png) [@Horsthorst](https://discourse.shapr3d.com/u/Horsthorst)\
**Post date:** [August 21, 2022, 8:20am UTC](https://discourse.shapr3d.com/t/removing-part-from-tube-precisely/21016/1 "2022-08-21T08:20:34Z")

</div>

Hi all,

I have an issue I’d like to ask help for.

The task is to remove a part out of a pipe in 90 degree angle regarding the edge. Additionally one end of this removing part shows a half circle. After removing this part out of the pipe, an exact counterpart is to create to generate a kind of a sliding-in part. In 2-D it is no problem but in 3-D I don’t know how to. Using the transfer tool didn’t work.

Thanks for any help!

Best

Jan

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/3/9/39cc54239ef804e6061ba15ee4a9a970d2915d5b.jpeg)

---

<div class="post-metadata">

**Author:** ![Karim](https://avatars.discourse-cdn.com/v4/letter/k/46a35a/32.png) [@Karim](https://discourse.shapr3d.com/u/Karim)\
**Post date:** [August 21, 2022, 5:05pm UTC](https://discourse.shapr3d.com/t/removing-part-from-tube-precisely/21016/2 "2022-08-21T17:05:06Z")

</div>

Look at this. Duplicate model and then use subtract and intersect model.

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/b/f/bff9b3e3d287fd4b5d8f6cbbf1d4d71a15f1d6ee.jpeg)  
[Tube-cut.shapr](https://discourse.shapr3d.com/uploads/short-url/6qkeQIBK9eiTaLjr0rmPqJ4Zw0k.shapr) (14.2 KB)