# Rope around elipse with offset

**URL:** <https://discourse.shapr3d.com/t/rope-around-elipse-with-offset/39242>\
**Category:** Modeling Questions\
**Created:** [August 24, 2025, 1:02pm UTC](https://discourse.shapr3d.com/t/rope-around-elipse-with-offset/39242 "2025-08-24T13:02:23Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![SCALEMODEL](https://avatars.discourse-cdn.com/v4/letter/s/77aa72/32.png) [@SCALEMODEL](https://discourse.shapr3d.com/u/SCALEMODEL)\
**Post date:** [August 24, 2025, 4:02pm UTC](https://discourse.shapr3d.com/t/rope-around-elipse-with-offset/39242/6 "2025-08-24T16:02:34Z")

</div>

Another variant

Revolve

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/9/1/911969ec9a72eeb5504f195d9933307b5ebb0d14.jpeg)

Trim the spring

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/e/4/e4bb98f8b847375e4ffe9045d5e17dbed3826eea.jpeg)

Use edge to sweep

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/2/8/28734929092ce9cbd0918ad727c73de4d69766a1.jpeg)

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/b/5/b5a9dce4a31cef9c1bd377a5e6de1980b81f188b.jpeg)

> [@Tapered thread](https://discourse.shapr3d.com/t/tapered-thread/9312/2):
>
> (upload://8AmQXY5N30lPFcDp1xfG11NSPAz.jpeg) it is also useful to draw a profile and use the sweep tool on the outer line that arises after using the intersect tool

> [@Unicorn horn anybody?](https://discourse.shapr3d.com/t/unicorn-horn-anybody/39083/12):
>
> Yes it was loft.

---

_[View the full topic](https://discourse.shapr3d.com/t/rope-around-elipse-with-offset/39242)._