# Share my experience with Shapr3D

**URL:** <https://discourse.shapr3d.com/t/share-my-experience-with-shapr3d/18458>\
**Category:** Modeling Questions\
**Created:** [March 31, 2022, 10:20pm UTC](https://discourse.shapr3d.com/t/share-my-experience-with-shapr3d/18458 "2022-03-31T22:20:34Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Faisaln](https://avatars.discourse-cdn.com/v4/letter/f/47e85d/32.png) [@Faisaln](https://discourse.shapr3d.com/u/Faisaln)\
**Post date:** [March 31, 2022, 10:20pm UTC](https://discourse.shapr3d.com/t/share-my-experience-with-shapr3d/18458/1 "2022-03-31T22:20:34Z")

</div>

![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/3/38d9286ab8ec793a5219435744888228aef63fb1.jpeg)  
 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/9/9852f2070eccfdc107a897a427a094a36079c72e.jpeg)  
—————  
Through my experience with Shapr3D, I designed several models and then decided to print this design, which is a cigarette holder. After several attempts, I encountered a problem that the photon mono x 6k device does not make the clipboard completely, as it performs the command 50% /4 through a file ( stl) and (3mf) and I shared the problem here and found that everyone wanted help as well as the support team. I thank everyone who helped me very much. I tried the (obj) file and indeed the process was successful, but with the defects that the design became smaller than required and there are also scratches, I think Because of the 3D printer program, because after I uploaded the file, the design appeared in a size of 2 mm and then I pressed on Fit Maxim and it became like this and it is good, but as I mentioned earlier there are defects and I also made a mistake in choosing this design as a start, I must choose a small design to save on resin and also not Wasting time, and currently I will try several files until I find the right file and I will show you the results in the future. I forgot to introduce myself, my name is Faisal from Kuwait, and my first experience with Shapr3D and 3D printer, and I also want to comment on Shapr3D It is a very excellent and very easy program and its capabilities are very high, but it is missing some simple things, and I am sure the work team is developing it for the better. Thank you very much once again to the support team and everyone who helped me here, and I wish you and me success.

---

<div class="post-metadata">

**Author:** ![Istvan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/istvan/32/23668_2.png) [@Istvan](https://discourse.shapr3d.com/u/Istvan)\
**Post date:** [April 1, 2022, 8:59pm UTC](https://discourse.shapr3d.com/t/share-my-experience-with-shapr3d/18458/2 "2022-04-01T20:59:58Z")

</div>

Great job, well done!

---

<div class="post-metadata">

**Author:** ![Faisaln](https://avatars.discourse-cdn.com/v4/letter/f/47e85d/32.png) [@Faisaln](https://discourse.shapr3d.com/u/Faisaln)\
**Post date:** [April 1, 2022, 9:30pm UTC](https://discourse.shapr3d.com/t/share-my-experience-with-shapr3d/18458/3 "2022-04-01T21:30:45Z")

</div>

Thank you so much .