# Sharing my first model!

**URL:** <https://discourse.shapr3d.com/t/sharing-my-first-model/7891>\
**Category:** Share your creations\
**Created:** [June 6, 2020, 12:26am UTC](https://discourse.shapr3d.com/t/sharing-my-first-model/7891 "2020-06-06T00:26:06Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![MaxRobotnick](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/maxrobotnick/32/6338_2.png) [@MaxRobotnick](https://discourse.shapr3d.com/u/MaxRobotnick)\
**Post date:** [June 6, 2020, 12:26am UTC](https://discourse.shapr3d.com/t/sharing-my-first-model/7891/1 "2020-06-06T00:26:06Z")

</div>

So been playing around with shapr3d for a few days and finally decided I was ready to try some product design.

I’m really Impressed how the software runs. I can quickly just scribble and cut and carve out shapes super easily. I am never going back to poly Modeling, this is way easier and quicker!.

Started this one maybe 2 hours ago, futuristic kettle! 😃 . This poly modeled would have taken days. Still WIP. Will post final when it’s all done and rendered out. 🙂 [image|375x500](https://discourse.shapr3d.com/uploads/short-url/zX1gbpWHmEFqIYnmNBNaEXh1POE.jpeg)

---

<div class="post-metadata">

**Author:** ![TigerMike](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/tigermike/32/32650_2.png) [@TigerMike](https://discourse.shapr3d.com/u/TigerMike)\
**Post date:** [June 6, 2020, 12:35am UTC](https://discourse.shapr3d.com/t/sharing-my-first-model/7891/2 "2020-06-06T00:35:41Z")

</div>

Nicely done! Thanks for sharing.  
Next time, do a screen grab within Shapr3D. Go to **Export** and select **Image**.

---

<div class="post-metadata">

**Author:** ![mikenbrenda](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/mikenbrenda/32/6386_2.png) [@mikenbrenda](https://discourse.shapr3d.com/u/mikenbrenda)\
**Post date:** [June 6, 2020, 7:23am UTC](https://discourse.shapr3d.com/t/sharing-my-first-model/7891/3 "2020-06-06T07:23:54Z")

</div>

What do you mean by Scibble? I am so new I purchased however I never designed before, did you use a tutorial?, there are so many of them, I’m not sure which one to use without being turned off cause I picked the wrong one to learn with.

Do you recommend a tutorial to start with?

---

<div class="post-metadata">

**Author:** ![Peerke](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/peerke/32/6384_2.png) [@Peerke](https://discourse.shapr3d.com/u/Peerke)\
**Post date:** [June 6, 2020, 8:03am UTC](https://discourse.shapr3d.com/t/sharing-my-first-model/7891/4 "2020-06-06T08:03:17Z")

</div>

my first model apart from the basic demo ones,  
its so easy to freeflow design in this app

 ![shapr3D](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/4/4fac19223f092ba1b001903ebf06a08400054a3a.jpeg)

---

<div class="post-metadata">

**Author:** ![AROSS](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/aross/32/27113_2.png) [@AROSS](https://discourse.shapr3d.com/u/AROSS)\
**Post date:** [June 12, 2024, 7:04am UTC](https://discourse.shapr3d.com/t/sharing-my-first-model/7891/5 "2024-06-12T07:04:33Z")

</div>

Hi nice work! Could you may be do a similar job. We are reaching out for a cooler hose (pice for a car: Touareg V8 2004). it impossible to find even used…  
best Andreas