# Shave It

**URL:** <https://discourse.shapr3d.com/t/shave-it/23454>\
**Category:** Modeling Questions\
**Created:** [January 7, 2023, 3:34pm UTC](https://discourse.shapr3d.com/t/shave-it/23454 "2023-01-07T15:34:38Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![DaddyUchi](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/daddyuchi/32/20964_2.png) [@DaddyUchi](https://discourse.shapr3d.com/u/DaddyUchi)\
**Post date:** [January 7, 2023, 3:34pm UTC](https://discourse.shapr3d.com/t/shave-it/23454/1 "2023-01-07T15:34:39Z")

</div>

Hello Everyone,  
I am new to CAD all together. I have trying to research on how to shave this part of the project I am doing. Please help.

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/9/8/98a379a021629432b7721e65ca9a0b595d0a6186.jpeg)

Hopefully, the image uploaded correctly. There is a little nipple inside of the tub. I can’t figure out how to make if flush on the inside while keeping the hole in the pipe. Thank you in advance.

---

<div class="post-metadata">

**Author:** ![Oregonerd](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/oregonerd/32/8012_2.png) [@Oregonerd](https://discourse.shapr3d.com/u/Oregonerd)\
**Post date:** [January 7, 2023, 3:48pm UTC](https://discourse.shapr3d.com/t/shave-it/23454/2 "2023-01-07T15:48:37Z")

</div>

Tap on the face of the nipple and use “replace face”. Try that.

---

<div class="post-metadata">

**Author:** ![DaddyUchi](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/daddyuchi/32/20964_2.png) [@DaddyUchi](https://discourse.shapr3d.com/u/DaddyUchi)\
**Post date:** [January 7, 2023, 5:21pm UTC](https://discourse.shapr3d.com/t/shave-it/23454/3 "2023-01-07T17:21:59Z")

</div>

Hi Oregonerd,  
Thank you for the reply. I utilized the “replace face” and it worked. Thank you so much for your help!!!