# Sheet metal tab and slot design - struggle

**URL:** <https://discourse.shapr3d.com/t/sheet-metal-tab-and-slot-design-struggle/37392>\
**Category:** Modeling Questions\
**Created:** [April 7, 2025, 3:58pm UTC](https://discourse.shapr3d.com/t/sheet-metal-tab-and-slot-design-struggle/37392 "2025-04-07T15:58:04Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![boslaw](https://avatars.discourse-cdn.com/v4/letter/b/2bfe46/32.png) [@boslaw](https://discourse.shapr3d.com/u/boslaw)\
**Post date:** [April 7, 2025, 6:06pm UTC](https://discourse.shapr3d.com/t/sheet-metal-tab-and-slot-design-struggle/37392/3 "2025-04-07T18:06:19Z")

</div>

I can use sweep vs loft to design the ramp as you see in the picture (although designing with sweep when I make a curve that spirals down to another level doesn’t work great). The problem I’m having is, how to design this ramp as 3 different pieces with tab & slots to hold the pieces together? If I design just the floor of the ramp and then try to add tabs, I can’t quite get them to conform to the ramp shape. Designing sides apart from the floor with slots that match the tabs is completely beyond my skillset.

---

_[View the full topic](https://discourse.shapr3d.com/t/sheet-metal-tab-and-slot-design-struggle/37392)._
