# Sketch tools for corner

**URL:** <https://discourse.shapr3d.com/t/sketch-tools-for-corner/11211>\
**Category:** Modeling Questions\
**Created:** [February 1, 2021, 11:18am UTC](https://discourse.shapr3d.com/t/sketch-tools-for-corner/11211 "2021-02-01T11:18:43Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![AnkerBak](https://avatars.discourse-cdn.com/v4/letter/a/3d9bf3/32.png) [@AnkerBak](https://discourse.shapr3d.com/u/AnkerBak)\
**Post date:** [February 1, 2021, 11:18am UTC](https://discourse.shapr3d.com/t/sketch-tools-for-corner/11211/1 "2021-02-01T11:18:43Z")

</div>

Dear shapr3d  
I have a question regarding sketching in shapr3d. I’m pretty new to sharpr3d, and have a bit of a hard time turning to the sketch feature, as I come directly from Rhino3D, which is very different.

In my work as (furniture designer) I make many round corners on my sketches, as I also use my 3d program as a sketch tool. But I found it very difficult / slow to make a radius on a corner in my sketches, as I am right now making a circle in the corner and cutting it to.

I have not been able to find some easy features online, so hope you can help?

Best  
Anker

---

<div class="post-metadata">

**Author:** ![KPeter](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/kpeter/32/7644_2.png) [@KPeter](https://discourse.shapr3d.com/u/KPeter)\
**Post date:** [February 1, 2021, 11:52am UTC](https://discourse.shapr3d.com/t/sketch-tools-for-corner/11211/2 "2021-02-01T11:52:59Z")

</div>

Hello, currently we do not have a sketch filleting feature (as Fillet Curves in Rhino), the workaround is to create circles and trim them to get the radiuses

---

<div class="post-metadata">

**Author:** ![AnkerBak](https://avatars.discourse-cdn.com/v4/letter/a/3d9bf3/32.png) [@AnkerBak](https://discourse.shapr3d.com/u/AnkerBak)\
**Post date:** [February 1, 2021, 12:00pm UTC](https://discourse.shapr3d.com/t/sketch-tools-for-corner/11211/3 "2021-02-01T12:00:01Z")

</div>

Thank you Peter

I will work on with this…

---

<div class="post-metadata">

**Author:** ![UCS308](https://avatars.discourse-cdn.com/v4/letter/u/7ab992/32.png) [@UCS308](https://discourse.shapr3d.com/u/UCS308)\
**Post date:** [June 13, 2021, 3:08pm UTC](https://discourse.shapr3d.com/t/sketch-tools-for-corner/11211/4 "2021-06-13T15:08:42Z")

</div>

I am also trying to radius the corners of a sketched rectangle. Has this a feature been added yet? I tried creating arcs, but they are impossible to line up and square to the adjacent edges of the rectangle. The rotate option is not avail able to so I cannot finesse the radius. I have looked for examples of adding a radius to a square or rectangle but cannot find one. For furniture makers this is a pretty common function.

---

<div class="post-metadata">

**Author:** ![KPeter](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/kpeter/32/7644_2.png) [@KPeter](https://discourse.shapr3d.com/u/KPeter)\
**Post date:** [June 14, 2021, 9:56am UTC](https://discourse.shapr3d.com/t/sketch-tools-for-corner/11211/5 "2021-06-14T09:56:44Z")

</div>

Hi, it has not been added yet. If you wish to create fillets in sketches, I would advise locking the straight line, draw a circle and make it tangent to the lines after setting the radius, then trim away the details that are not needed.

> **[My Movie 3](https://share.getcloudapp.com/OAuQqALv)**
>
> Shared with CloudApp

---

<div class="post-metadata">

**Author:** ![Nico](https://avatars.discourse-cdn.com/v4/letter/n/b5a626/32.png) [@Nico](https://discourse.shapr3d.com/u/Nico)\
**Post date:** [February 22, 2023, 6:52pm UTC](https://discourse.shapr3d.com/t/sketch-tools-for-corner/11211/6 "2023-02-22T18:52:05Z")

</div>

Any update on this feature? Thanks.