# Slicing issues on Cura

**URL:** <https://discourse.shapr3d.com/t/slicing-issues-on-cura/8651>\
**Category:** Modeling Questions\
**Created:** [August 14, 2020, 2:31am UTC](https://discourse.shapr3d.com/t/slicing-issues-on-cura/8651 "2020-08-14T02:31:27Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![torressveta](https://avatars.discourse-cdn.com/v4/letter/t/e274bd/32.png) [@torressveta](https://discourse.shapr3d.com/u/torressveta)\
**Post date:** [August 14, 2020, 2:31am UTC](https://discourse.shapr3d.com/t/slicing-issues-on-cura/8651/1 "2020-08-14T02:31:27Z")

</div>

Hi there! I’m having issues with my model being sliced through Cura to convert into G-Code. I united all bodies with all layers visible, exported to STL, tried both low and high resolution exports, dimensions in mm. I have some models that slice perfectly and others that do not even with using the same settings to export. Below is what my model is supposed to look like and then what it looks like after it is sliced on Cura

 ![94195ED8-A982-4CEE-A737-5970EBCCE910](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/0/09a436e55e2e450cc709c17f9618f128020e503c.jpeg)  
Anyone know what the issue is?

---

<div class="post-metadata">

**Author:** ![Dzee](https://avatars.discourse-cdn.com/v4/letter/d/0ea827/32.png) [@Dzee](https://discourse.shapr3d.com/u/Dzee)\
**Post date:** [August 14, 2020, 2:44am UTC](https://discourse.shapr3d.com/t/slicing-issues-on-cura/8651/2 "2020-08-14T02:44:24Z")

</div>

Did you try slicing with slicr or another slicer just to see what the result is? If you post the stl I can slice in prusa slicer and see what i get…

---

<div class="post-metadata">

**Author:** ![Indyflyer](https://avatars.discourse-cdn.com/v4/letter/i/77aa72/32.png) [@Indyflyer](https://discourse.shapr3d.com/u/Indyflyer)\
**Post date:** [August 14, 2020, 2:44am UTC](https://discourse.shapr3d.com/t/slicing-issues-on-cura/8651/3 "2020-08-14T02:44:44Z")

</div>

Side walls too thin? Maybe thinner than your printer is capable of printing 🤷‍♀️

---

<div class="post-metadata">

**Author:** ![AndrewD](https://avatars.discourse-cdn.com/v4/letter/a/ee59a6/32.png) [@AndrewD](https://discourse.shapr3d.com/u/AndrewD)\
**Post date:** [August 14, 2020, 3:02am UTC](https://discourse.shapr3d.com/t/slicing-issues-on-cura/8651/4 "2020-08-14T03:02:50Z")

</div>

I’m not an expert, but I’d guess it’s your cura settings because it looks like only the thin portions on top are being omitted. Check the thickness of those walls.

---

<div class="post-metadata">

**Author:** ![torressveta](https://avatars.discourse-cdn.com/v4/letter/t/e274bd/32.png) [@torressveta](https://discourse.shapr3d.com/u/torressveta)\
**Post date:** [August 17, 2020, 5:21pm UTC](https://discourse.shapr3d.com/t/slicing-issues-on-cura/8651/5 "2020-08-17T17:21:31Z")

</div>

Okay, after countless research, I finally found a solution. I didn’t want to thicken up the walls even if that could’ve solved my issue here. I enabled and ticked the ‘Print Thin Walls’ in the shell settings. IT WORKED!