# Snap/Align Tool and Tolerance Setting

**URL:** <https://discourse.shapr3d.com/t/snap-align-tool-and-tolerance-setting/25806>\
**Category:** Feature requests\
**Created:** [May 14, 2023, 5:44am UTC](https://discourse.shapr3d.com/t/snap-align-tool-and-tolerance-setting/25806 "2023-05-14T05:44:09Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![21Suspect](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/21suspect/32/20677_2.png) [@21Suspect](https://discourse.shapr3d.com/u/21Suspect)\
**Post date:** [May 14, 2023, 5:44am UTC](https://discourse.shapr3d.com/t/snap-align-tool-and-tolerance-setting/25806/1 "2023-05-14T05:44:09Z")

</div>

I cannot count the amount of times i was frustrated about two parts/lines/points being very very close to each other but not getting them to Align. A “magnet” tool that fuses the selected point/lines together would be very helpfull. OR a tolerance setting that would goup them automatically if they are for example only 0.1 mm apart from each other. (like a 3 dimensional grid the point would stuck to)

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/5/4/54028e74f0c29103421b16879dcb9af47f7a6f3a.jpeg)