# Special chamfer use case

**URL:** <https://discourse.shapr3d.com/t/special-chamfer-use-case/14015>\
**Category:** Modeling Questions\
**Created:** [July 23, 2021, 5:56pm UTC](https://discourse.shapr3d.com/t/special-chamfer-use-case/14015 "2021-07-23T17:56:00Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![spasco](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/spasco/32/11332_2.png) [@spasco](https://discourse.shapr3d.com/u/spasco)\
**Post date:** [July 23, 2021, 5:56pm UTC](https://discourse.shapr3d.com/t/special-chamfer-use-case/14015/1 "2021-07-23T17:56:00Z")

</div>

My question is in the attached image.

Thanks in advance.  
Stephen

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/e/e94aaecdd22e318c6f3164ba8139a54b717002dd.jpeg)

---

<div class="post-metadata">

**Author:** ![NathanD](https://avatars.discourse-cdn.com/v4/letter/n/dec6dc/32.png) [@NathanD](https://discourse.shapr3d.com/u/NathanD)\
**Post date:** [July 24, 2021, 8:53am UTC](https://discourse.shapr3d.com/t/special-chamfer-use-case/14015/2 "2021-07-24T08:53:55Z")

</div>

Hi @spasco  
Welcome!

Best I can come up with so far is select the edge of the chamfer, and blend it in with a fillet.

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/b/b137801ff51a754c9fa3a4e72c76f04057e9c09c.jpeg)

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/5/5e5d7d688f20fc64cf7bea519d9e6eb3a0ecaa43.jpeg)

I don’t know if this would work for you.

---

<div class="post-metadata">

**Author:** ![MrJack88](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/mrjack88/32/8138_2.png) [@MrJack88](https://discourse.shapr3d.com/u/MrJack88)\
**Post date:** [July 24, 2021, 9:26am UTC](https://discourse.shapr3d.com/t/special-chamfer-use-case/14015/3 "2021-07-24T09:26:07Z")

</div>

You could make a separate body shaped as you want  
And use union tool with the original body.