# Splines in 2D Drawings

**URL:** <https://discourse.shapr3d.com/t/splines-in-2d-drawings/35766>\
**Category:** Modeling Questions\
**Created:** [December 26, 2024, 7:13pm UTC](https://discourse.shapr3d.com/t/splines-in-2d-drawings/35766 "2024-12-26T19:13:47Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![slowriot](https://avatars.discourse-cdn.com/v4/letter/s/58956e/32.png) [@slowriot](https://discourse.shapr3d.com/u/slowriot)\
**Post date:** [December 26, 2024, 7:13pm UTC](https://discourse.shapr3d.com/t/splines-in-2d-drawings/35766/1 "2024-12-26T19:13:47Z")

</div>

I can see that this question has been asked before but I haven’t seen it answered. Is there any way to make dimensional measurements for splines in 2D Drawings? Here is the part that I am working on and how the splines are included.

Thanks!

 ![Screenshot 2024-12-26 at 11.11.19 AM](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/5/3/5383077cf124f59c364c6d9c9eb88fcde5033fcd.png)

---

<div class="post-metadata">

**Author:** ![SCALEMODEL](https://avatars.discourse-cdn.com/v4/letter/s/77aa72/32.png) [@SCALEMODEL](https://discourse.shapr3d.com/u/SCALEMODEL)\
**Post date:** [December 26, 2024, 7:43pm UTC](https://discourse.shapr3d.com/t/splines-in-2d-drawings/35766/2 "2024-12-26T19:43:46Z")

</div>

![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/9/2/9216c0187703b5d702c9d2c13943b03a5055d48e.png)

That would be the length of the spline.

If you are just looking for horizontal or vertical length you can manually use construction lines like a ruler to measure.

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/e/d/ed359e7780fe6c4a0e943bd30773c015c6dff6fe.png)

also if you select the end points you will get measurements.

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/c/8/c8b5c9862555d8ffc30f79c46bbfc4b0bdfc6b76.png)