# Spring design

**URL:** <https://discourse.shapr3d.com/t/spring-design/38176>\
**Category:** Modeling Questions\
**Created:** [May 29, 2025, 6:04pm UTC](https://discourse.shapr3d.com/t/spring-design/38176 "2025-05-29T18:04:05Z")\
**Posts on this page:** 20\
**Page:** 3

<div class="post-metadata">

**Author:** ![JST](https://avatars.discourse-cdn.com/v4/letter/j/edb3f5/32.png) [@JST](https://discourse.shapr3d.com/u/JST)\
**Post date:** [May 30, 2025, 6:09pm UTC](https://discourse.shapr3d.com/t/spring-design/38176/41 "2025-05-30T18:09:22Z")

</div>

Maybe limitation the s3D the vertical part connection with simple circlepart..

---

<div class="post-metadata">

**Author:** ![Xdrakosha](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/xdrakosha/32/24881_2.png) [@Xdrakosha](https://discourse.shapr3d.com/u/Xdrakosha)\
**Post date:** [May 30, 2025, 6:10pm UTC](https://discourse.shapr3d.com/t/spring-design/38176/42 "2025-05-30T18:10:28Z")

</div>

> [@JST](#):
>
> Maybe limitation the s3D the vertical part connection with simple circlepart..

Maybe. But in loft variant its invisible 🙂

---

<div class="post-metadata">

**Author:** ![JST](https://avatars.discourse-cdn.com/v4/letter/j/edb3f5/32.png) [@JST](https://discourse.shapr3d.com/u/JST)\
**Post date:** [May 30, 2025, 6:11pm UTC](https://discourse.shapr3d.com/t/spring-design/38176/43 "2025-05-30T18:11:49Z")

</div>

Step:  
[Spring.step](https://discourse.shapr3d.com/uploads/short-url/eybNEgrn9moigqrFsGdpBPmCKL0.step) (2.3 MB)

---

<div class="post-metadata">

**Author:** ![JST](https://avatars.discourse-cdn.com/v4/letter/j/edb3f5/32.png) [@JST](https://discourse.shapr3d.com/u/JST)\
**Post date:** [May 30, 2025, 6:17pm UTC](https://discourse.shapr3d.com/t/spring-design/38176/44 "2025-05-30T18:17:17Z")

</div>

I think , because there is the tangent constraint.

 ![IMG_1963](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/6/e/6e1266f7409e277c3471dcd5cbea855d42ba80d9.jpeg)

---

<div class="post-metadata">

**Author:** ![SCALEMODEL](https://avatars.discourse-cdn.com/v4/letter/s/77aa72/32.png) [@SCALEMODEL](https://discourse.shapr3d.com/u/SCALEMODEL)\
**Post date:** [May 30, 2025, 6:19pm UTC](https://discourse.shapr3d.com/t/spring-design/38176/45 "2025-05-30T18:19:12Z")

</div>

At least for me what I’m looking out is the top down.

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/9/f/9fd09e7638e62f842821b421959e1d1d96dac269.jpeg)

---

<div class="post-metadata">

**Author:** ![Xdrakosha](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/xdrakosha/32/24881_2.png) [@Xdrakosha](https://discourse.shapr3d.com/u/Xdrakosha)\
**Post date:** [May 30, 2025, 6:19pm UTC](https://discourse.shapr3d.com/t/spring-design/38176/46 "2025-05-30T18:19:44Z")

</div>

> [@JST](#):
>
> I think , because there is the tangent constraint.

Not sure I understand what you want to say 🙂

---

<div class="post-metadata">

**Author:** ![JST](https://avatars.discourse-cdn.com/v4/letter/j/edb3f5/32.png) [@JST](https://discourse.shapr3d.com/u/JST)\
**Post date:** [May 30, 2025, 6:21pm UTC](https://discourse.shapr3d.com/t/spring-design/38176/47 "2025-05-30T18:21:40Z")

</div>

Circle part tangent with the vertical line, should be ok from a geometric point of view

---

<div class="post-metadata">

**Author:** ![Xdrakosha](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/xdrakosha/32/24881_2.png) [@Xdrakosha](https://discourse.shapr3d.com/u/Xdrakosha)\
**Post date:** [May 30, 2025, 6:23pm UTC](https://discourse.shapr3d.com/t/spring-design/38176/48 "2025-05-30T18:23:38Z")

</div>

How is that related to my message that it’s invisible in loft variant? 🙂

---

<div class="post-metadata">

**Author:** ![JST](https://avatars.discourse-cdn.com/v4/letter/j/edb3f5/32.png) [@JST](https://discourse.shapr3d.com/u/JST)\
**Post date:** [May 30, 2025, 6:24pm UTC](https://discourse.shapr3d.com/t/spring-design/38176/49 "2025-05-30T18:24:49Z")

</div>

Becuse the zebra is only vertical or horisontal..

Here is two zebra setting from the top

 ![IMG_1965](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/8/b/8b6e4689e29a72e181e0573ee7fb9bf063e9bc85.jpeg)  
 ![IMG_1964](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/2/5/25ace914e64fb97aa87796e9e7c2d682cb0a7fb7.jpeg)

---

<div class="post-metadata">

**Author:** ![JST](https://avatars.discourse-cdn.com/v4/letter/j/edb3f5/32.png) [@JST](https://discourse.shapr3d.com/u/JST)\
**Post date:** [May 30, 2025, 6:25pm UTC](https://discourse.shapr3d.com/t/spring-design/38176/50 "2025-05-30T18:25:28Z")

</div>

Try again😎

---

<div class="post-metadata">

**Author:** ![SCALEMODEL](https://avatars.discourse-cdn.com/v4/letter/s/77aa72/32.png) [@SCALEMODEL](https://discourse.shapr3d.com/u/SCALEMODEL)\
**Post date:** [May 30, 2025, 6:29pm UTC](https://discourse.shapr3d.com/t/spring-design/38176/51 "2025-05-30T18:29:42Z")

</div>

Actually I wasn’t focused on the Zebra, it was on by default when I screenshot. I was talking about the curvature, yours go straight out while alex and mine curves which is reason difference between mine with the sweep and ALEX version looks good without blemishes it is something I want to figure out, render issue or something to do with continuation of sweeps vs lofts.

---

<div class="post-metadata">

**Author:** ![Xdrakosha](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/xdrakosha/32/24881_2.png) [@Xdrakosha](https://discourse.shapr3d.com/u/Xdrakosha)\
**Post date:** [May 30, 2025, 6:34pm UTC](https://discourse.shapr3d.com/t/spring-design/38176/52 "2025-05-30T18:34:46Z")

</div>

> [@JST](#):
>
> Try again😎

I don’t understand you.

---

<div class="post-metadata">

**Author:** ![JST](https://avatars.discourse-cdn.com/v4/letter/j/edb3f5/32.png) [@JST](https://discourse.shapr3d.com/u/JST)\
**Post date:** [May 30, 2025, 6:36pm UTC](https://discourse.shapr3d.com/t/spring-design/38176/53 "2025-05-30T18:36:59Z")

</div>

I misunderstood…

---

<div class="post-metadata">

**Author:** ![jean-philippe2](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/jean-philippe2/32/27353_2.png) [@jean-philippe2](https://discourse.shapr3d.com/u/jean-philippe2)\
**Post date:** [May 30, 2025, 9:04pm UTC](https://discourse.shapr3d.com/t/spring-design/38176/54 "2025-05-30T21:04:12Z")

</div>

> [@SCALEMODEL](#):
>
> Technically I don’t believe that is correct, he is creating segments of curve that is angled, if you do that now you need more and more segments to make more accurate.
> 
> You would need real 3d Curves to do that which is missing feature.
> 
> Since this was a tutorial I choose some other methods but realistically I would do it in another program like Rhino, because with that you really get perfect springy thing because it would be whole curve without segments to make it more accurate.

Your Rhino imported curve is a mesh or a sketch ?  
Because all my exports generate mesh curve. Test with MoI3D and OnShape. Too Bad.

---

<div class="post-metadata">

**Author:** ![SCALEMODEL](https://avatars.discourse-cdn.com/v4/letter/s/77aa72/32.png) [@SCALEMODEL](https://discourse.shapr3d.com/u/SCALEMODEL)\
**Post date:** [May 30, 2025, 11:06pm UTC](https://discourse.shapr3d.com/t/spring-design/38176/55 "2025-05-30T23:06:13Z")

</div>

I tried Moi3d while back, it seemed more like Rhino so you might really like it.

You might already know Onshape, Solidworks, Shapr3d all use Parasolid Kernel. So all the feature in those programs Shapr3d can have it as well, as long as Shapr implements it, so when ever there is a chance I like to point out the Missing Feature! 🫠 It’s funny if you go to Siemens website Shapr3d is one of their promotional case study.

> **[Shapr3D integrates PLM Components in a leading application for computer-aided...](https://resources.sw.siemens.com/en-US/case-study-shapr3d/)**
>
> Parasolid and D-Cubed components enable software start-up to enter new market with assurance of quality and reduced investment

I found IGES is the only format from Rhino that exports as Curves. When you import in Shapr it looks like sketch but can’t edit it, only scale it and comes in as 3d Model but not as Mesh. You can apply sweeps and loft guides on it.

---

<div class="post-metadata">

**Author:** ![SCALEMODEL](https://avatars.discourse-cdn.com/v4/letter/s/77aa72/32.png) [@SCALEMODEL](https://discourse.shapr3d.com/u/SCALEMODEL)\
**Post date:** [May 31, 2025, 2:50am UTC](https://discourse.shapr3d.com/t/spring-design/38176/56 "2025-05-31T02:50:50Z")

</div>

I figured out the issue on my version.

I simplified the approach for the all sweep.

[spring v2.shapr.zip](https://discourse.shapr3d.com/uploads/short-url/lADJq32lcBGFpe3Zgr1jvrOg1vC.zip) (29.3 MB)

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/7/7/77f906377d61a0607d516fa369af40e437982eb6.jpeg)

---

<div class="post-metadata">

**Author:** ![jean-philippe2](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/jean-philippe2/32/27353_2.png) [@jean-philippe2](https://discourse.shapr3d.com/u/jean-philippe2)\
**Post date:** [May 31, 2025, 5:49am UTC](https://discourse.shapr3d.com/t/spring-design/38176/57 "2025-05-31T05:49:44Z")

</div>

> [@Xdrakosha](#):
>
> I have. As far as I know you can’t extract a line, you have to make closed sketch for extrusion. So only way I know is Sweep.
> 
> Or maybe I understand your question incorrectly.

Hi,  
Sweep is used in this screenshot. We can see the selected line but i can’t extract it.  
Thanks

 ![Capture d’écran 2025-05-30 à 14.33.22](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/6/0/60e2e01642079ec0f55742b73321f0c077507e4c.jpeg)

---

<div class="post-metadata">

**Author:** ![Xdrakosha](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/xdrakosha/32/24881_2.png) [@Xdrakosha](https://discourse.shapr3d.com/u/Xdrakosha)\
**Post date:** [May 31, 2025, 6:38am UTC](https://discourse.shapr3d.com/t/spring-design/38176/58 "2025-05-31T06:38:20Z")

</div>

> [@jean-philippe2](#):
>
> Sweep is used in this screenshot.

I don’t see sweep usage on your screenshots. I see only revolve and then you select the edge of the body.

Also still unclear what do yo mean by “extract”.

---

<div class="post-metadata">

**Author:** ![jean-philippe2](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/jean-philippe2/32/27353_2.png) [@jean-philippe2](https://discourse.shapr3d.com/u/jean-philippe2)\
**Post date:** [May 31, 2025, 7:38am UTC](https://discourse.shapr3d.com/t/spring-design/38176/59 "2025-05-31T07:38:45Z")

</div>

Oups you are right !  
extract: copy the selected edge and use it as sketch spline  
The sweep could be used in this case.  
Thanks Alex 🙂

---

<div class="post-metadata">

**Author:** ![Xdrakosha](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/xdrakosha/32/24881_2.png) [@Xdrakosha](https://discourse.shapr3d.com/u/Xdrakosha)\
**Post date:** [May 31, 2025, 8:03am UTC](https://discourse.shapr3d.com/t/spring-design/38176/60 "2025-05-31T08:03:34Z")

</div>

> [@SCALEMODEL](#):
>
> I simplified the approach for the all sweep.

Interesting approach. I managed to get good results with it, but for me, it’s more difficult than using a loft.

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/0/4/04ae1b01b12f130eac54df49a8bbbd6a09d8c043.jpeg)  
 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/5/4/5432db65dc0fcf97548c0fd09119b2f3f8469f5b.jpeg)

[Previous page](https://discourse.shapr3d.com/t/spring-design/38176.md?page=2)

[Next page](https://discourse.shapr3d.com/t/spring-design/38176.md?page=4)
