# Spring design

**URL:** <https://discourse.shapr3d.com/t/spring-design/38176>\
**Category:** Modeling Questions\
**Created:** [May 29, 2025, 6:04pm UTC](https://discourse.shapr3d.com/t/spring-design/38176 "2025-05-29T18:04:05Z")\
**Posts on this page:** 17\
**Page:** 4

<div class="post-metadata">

**Author:** ![SCALEMODEL](https://avatars.discourse-cdn.com/v4/letter/s/77aa72/32.png) [@SCALEMODEL](https://discourse.shapr3d.com/u/SCALEMODEL)\
**Post date:** [May 31, 2025, 9:44am UTC](https://discourse.shapr3d.com/t/spring-design/38176/61 "2025-05-31T09:44:31Z")

</div>

So that method is because me being used to using the 3d curve feature. I try to mimic what I got used to, so method is bit awkward doing it in Shapr.

Also Jean you might like this since you want 3d curve extracted. I just realized if you make your 3d curve in Onshape save it as Parasolid when you import in Shapr you get the 3d CURVE!!

Curve generated by Onshape and swept within Shapr no issues.

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/0/2/02d68e8d087e190d24e4563c2b5fe079712a9edf.jpeg)  
 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/d/2/d28b22b4f88337fb76da0f4efa66f5691a5b0757.jpeg)

---

<div class="post-metadata">

**Author:** ![jean-philippe2](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/jean-philippe2/32/27353_2.png) [@jean-philippe2](https://discourse.shapr3d.com/u/jean-philippe2)\
**Post date:** [May 31, 2025, 10:15pm UTC](https://discourse.shapr3d.com/t/spring-design/38176/62 "2025-05-31T22:15:27Z")

</div>

Thanks !  
But when I import the Parasolid file in Shapr3D, it’s a mesh and not a sketch.

 ![Capture d’écran 2025-06-01 à 00.12.14](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/1/4/14f3bc4c7b933b19dab2ba5d74c9690ea83bea40.jpeg)

---

<div class="post-metadata">

**Author:** ![SCALEMODEL](https://avatars.discourse-cdn.com/v4/letter/s/77aa72/32.png) [@SCALEMODEL](https://discourse.shapr3d.com/u/SCALEMODEL)\
**Post date:** [May 31, 2025, 10:43pm UTC](https://discourse.shapr3d.com/t/spring-design/38176/63 "2025-05-31T22:43:39Z")

</div>

That is not a mesh, its a mathematical curve.

Your getting thing mixed up.

Mesh is bunch of points in 3d space that connects to form a surface and you connect all the side to make it solid. So mesh is bunch of points and has a resolution, more points in between higher resolution.

Curves are done by math formula. So I keep pointing out that is a missing feature, you can import it but Shapr don’t have editing feature for you to modify it. Since you can’t edit it you assume its a mesh. There is a difference between Sketch and Curves. Sketch is 2D only you can rotate but can never become 3d. While curves can go xyz but requires Shapr to implement features for the user to actually move the curve point it in all 3 directions.

Things you can do with the curve, you can project it, you can use sweep on it, you can’t do that with mesh. Also if you look at the layer icon badge it has Cube icon to indicate that it’s 3d item. Curves do not behave like Sketches.

---

<div class="post-metadata">

**Author:** ![jean-philippe2](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/jean-philippe2/32/27353_2.png) [@jean-philippe2](https://discourse.shapr3d.com/u/jean-philippe2)\
**Post date:** [June 1, 2025, 1:12am UTC](https://discourse.shapr3d.com/t/spring-design/38176/64 "2025-06-01T01:12:31Z")

</div>

Yes thank you, I understood correctly. I wrote Mesh because of the Cube icon.  
So, yes I can import the Onshape or Moi3D Curve (which I was already doing) but it’s not a Sketch. Too bad.  
So, I decided to do everything on Shapr3D (Sketch of helix and Sweep)

 ![Capture d’écran 2025-06-01 à 03.09.23](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/2/8/2835ca2b531929f0b603b2b5375c07fbd09c8913.jpeg)

---

<div class="post-metadata">

**Author:** ![SCALEMODEL](https://avatars.discourse-cdn.com/v4/letter/s/77aa72/32.png) [@SCALEMODEL](https://discourse.shapr3d.com/u/SCALEMODEL)\
**Post date:** [June 1, 2025, 2:55am UTC](https://discourse.shapr3d.com/t/spring-design/38176/65 "2025-06-01T02:55:20Z")

</div>

> [@jean-philippe2](#):
>
> I wrote Mesh because of the Cube icon

> [@jean-philippe2](#):
>
> Because all my exports generate mesh curve.

🫠 Misunderstanding of a mesh vs curve is a big difference.

Actually Cube is not a mesh Icon. Mesh is a Pentagon.

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/9/d/9dd4e2c4b42e8d03b855b758013ad989e18d9c7a.png)

If I had to simply your approach I would do this instead of rotating sketches, just shave off a cylinder.

Also if you just rotated a half circle, I would assume the top view will be slightly oval unless you accounted for that. I check the last one you made it was slight oval.

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/d/c/dc01118506818ca5730448a7783c97342772424e.jpeg)  
 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/2/1/219556e90cc0f376bd5ec5652657e35f72ab7051.jpeg)

Your approach has different result compared to revolve on the right purple.

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/2/1/2121d438d3fb007fee261e974dff71dc93ad1cc5.jpeg)

Your version will look different from the front vs side

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/c/a/ca4cad98578f9a02e8a5434dae64bc9178a0b410.jpeg)

---

<div class="post-metadata">

**Author:** ![jean-philippe2](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/jean-philippe2/32/27353_2.png) [@jean-philippe2](https://discourse.shapr3d.com/u/jean-philippe2)\
**Post date:** [June 1, 2025, 6:58am UTC](https://discourse.shapr3d.com/t/spring-design/38176/66 "2025-06-01T06:58:25Z")

</div>

Thanks a lot Kyun !  
Your method is very clean. I adopt it!

---

<div class="post-metadata">

**Author:** ![jean-philippe2](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/jean-philippe2/32/27353_2.png) [@jean-philippe2](https://discourse.shapr3d.com/u/jean-philippe2)\
**Post date:** [June 1, 2025, 11:43am UTC](https://discourse.shapr3d.com/t/spring-design/38176/67 "2025-06-01T11:43:50Z")

</div>

Hi,  
Here a “parametric” spring.  
Sketch Design of a module, a profile and a circle.  
Use Sweep.  
Duplicate the module by a Linear Pattern  
Create 4 variables

 ![Capture d’écran 2025-06-01 à 13.33.44](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/d/7/d7891bd05ced37c8b1845db18e3f6c480aa8e327.png)  
 ![Capture d’écran 2025-06-01 à 13.33.11](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/2/a/2a72367a2122fee0dd65f54451660fa77a0ae52b.jpeg)  
 ![Capture d’écran 2025-06-01 à 13.31.33](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/b/6/b6c8e18215bc904edadf5bf931ef9a674669ac0a.jpeg)  
Thanks to all!

---

<div class="post-metadata">

**Author:** ![Xdrakosha](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/xdrakosha/32/24881_2.png) [@Xdrakosha](https://discourse.shapr3d.com/u/Xdrakosha)\
**Post date:** [June 1, 2025, 12:14pm UTC](https://discourse.shapr3d.com/t/spring-design/38176/68 "2025-06-01T12:14:47Z")

</div>

> [@jean-philippe2](#):
>
> Here a “parametric” spring.  
> Sketch Design of a module, a profile and a circle.  
> Use Sweep.  
> Duplicate the module by a Linear Pattern

As for me that is a waste of time.

Only one simple sketch and one action. Everything is parametric through variables.

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/7/0/70944abbf4c248a089cc8635308170f8b58f0ee9.jpeg)  
 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/1/4/147e66a4b732b7c0af65a6ba2f504fb6c016e3b0.jpeg)

---

<div class="post-metadata">

**Author:** ![jean-philippe2](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/jean-philippe2/32/27353_2.png) [@jean-philippe2](https://discourse.shapr3d.com/u/jean-philippe2)\
**Post date:** [June 1, 2025, 1:53pm UTC](https://discourse.shapr3d.com/t/spring-design/38176/69 "2025-06-01T13:53:30Z")

</div>

> [@Xdrakosha](#):
>
> As for me that is a waste of time.
> 
> Only one simple sketch and one action. Everything is parametric through variables.

HAHAHA !  
You are right. 👍

---

<div class="post-metadata">

**Author:** ![SCALEMODEL](https://avatars.discourse-cdn.com/v4/letter/s/77aa72/32.png) [@SCALEMODEL](https://discourse.shapr3d.com/u/SCALEMODEL)\
**Post date:** [June 1, 2025, 4:23pm UTC](https://discourse.shapr3d.com/t/spring-design/38176/70 "2025-06-01T16:23:02Z")

</div>

So you might have missed, this version you are creating is SPRINGY but technically not a traditional spring that one thinks about which is the reason why I pointed out the differences between revolve and your 2d sketch method.

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/a/4/a4491af3692323d436bfd96c486db03758bbf8b7.jpeg)

---

<div class="post-metadata">

**Author:** ![SCALEMODEL](https://avatars.discourse-cdn.com/v4/letter/s/77aa72/32.png) [@SCALEMODEL](https://discourse.shapr3d.com/u/SCALEMODEL)\
**Post date:** [June 1, 2025, 4:42pm UTC](https://discourse.shapr3d.com/t/spring-design/38176/71 "2025-06-01T16:42:54Z")

</div>

This version of the projection to 2d sketch look like a wavy zig zag. The revolve and project sketch will give you this 2d sketch result, not flat straight lines.

Also with this version I made can be turned fully controlled via variables including end part that extends straight up, even the curvature of the bend that goes up, revolution count, total height, pretty much everything. But I could make plenty more with the time needed to set up the variables, unless I’m in the business of making all kind of springy springs 🫠.

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/6/d/6d185ba89c97c83eae2f7f6c95e6978ff4450f3d.jpeg)

> [@Spring design](https://discourse.shapr3d.com/t/spring-design/38176/56):
>
> I figured out the issue on my version. I simplified the approach for the all sweep. [spring v2.shapr.zip](https://discourse.shapr3d.com/uploads/short-url/lADJq32lcBGFpe3Zgr1jvrOg1vC.zip) (29.3 MB)

---

<div class="post-metadata">

**Author:** ![Bob3DPO](https://avatars.discourse-cdn.com/v4/letter/b/7993a0/32.png) [@Bob3DPO](https://discourse.shapr3d.com/u/Bob3DPO)\
**Post date:** [June 2, 2025, 12:03am UTC](https://discourse.shapr3d.com/t/spring-design/38176/72 "2025-06-02T00:03:12Z")

</div>

This has been an interesting discussion!

When I look at **spring v2.shapr** , the vertical end (the end parallel to the spring axis) is not round. Before taking this screenshot, I split the body to get a face parallel to xy plane. Is that a limitation of the all sweep method?

 ![IMG_0555](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/8/5/85820b1c813c4d3df6de63871a3eacf8d6ffd956.jpeg)

---

<div class="post-metadata">

**Author:** ![SCALEMODEL](https://avatars.discourse-cdn.com/v4/letter/s/77aa72/32.png) [@SCALEMODEL](https://discourse.shapr3d.com/u/SCALEMODEL)\
**Post date:** [June 2, 2025, 12:21am UTC](https://discourse.shapr3d.com/t/spring-design/38176/73 "2025-06-02T00:21:59Z")

</div>

Your are correct I believe that is a limitation with the sweep version. At the time I didn’t want diverge into a separate conversation so I didn’t mention it. But I believe but could be wrong, that is the source of the Kink in rendering that Alex pointed out. If you look at my at that V2 version you will see I used spline at first I used an ARC and the rendering kink showed up, I changed it to a splines the rendering kink disappeared.

Sweep is causing some distortions I noticed it more in this version. Revolve is I believe perfect but Sweep diverts a little.

> [@Spring design](https://discourse.shapr3d.com/t/spring-design/38176/18):
>
> So this can go in any direction Irregular part can be drawn on the cylinder.

Also gets into needing a Curve Analysis tool if you want perfect.

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/1/2/12f9300bcb3b83951281fb9289cf0104fdf5758c.jpeg)

Here is the Onshape version which I used to export 3d Curve and Sweep in Shapr3d, no issues with Rendering Kink and no deviation. Note file is bigger than 30mg limit.

> **[sweep - Filemail](https://www.filemail.com/d/oosudewsqsttgtv)**
>
> Click here to view and download these shared files from Filemail.com

---

<div class="post-metadata">

**Author:** ![Bob3DPO](https://avatars.discourse-cdn.com/v4/letter/b/7993a0/32.png) [@Bob3DPO](https://discourse.shapr3d.com/u/Bob3DPO)\
**Post date:** [June 2, 2025, 1:52am UTC](https://discourse.shapr3d.com/t/spring-design/38176/74 "2025-06-02T01:52:24Z")

</div>

Very nice work!

---

<div class="post-metadata">

**Author:** ![SCALEMODEL](https://avatars.discourse-cdn.com/v4/letter/s/77aa72/32.png) [@SCALEMODEL](https://discourse.shapr3d.com/u/SCALEMODEL)\
**Post date:** [June 2, 2025, 11:00am UTC](https://discourse.shapr3d.com/t/spring-design/38176/75 "2025-06-02T11:00:58Z")

</div>

Multi Part Sweep in Blender Render.

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/f/3/f3fd337ba3aed2bcd4c5b3e02cff8388e3bcbaff.jpeg)

Will post when I complete a test.

---

<div class="post-metadata">

**Author:** ![Horsthorst](https://avatars.discourse-cdn.com/v4/letter/h/b9bd4f/32.png) [@Horsthorst](https://discourse.shapr3d.com/u/Horsthorst)\
**Post date:** [June 13, 2025, 2:25pm UTC](https://discourse.shapr3d.com/t/spring-design/38176/76 "2025-06-13T14:25:37Z")

</div>

Hi everyone,

I now was about to go the way via the 2D projection to get the ending part of the spring. Therefor as a previous step I construct the normal spring part, then project it onto the cylinder and then project the cylinder‘s spring line onto the 2D sketch to add the end part.

When trying to project the edge of the spring onto the cylinder, it gives me inconsistent lines I can’t use… why that?

Best

Jan

 ![IMG_0353](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/7/1/719b534f267c8850f1ef0b2e8d16b6339e890b21.jpeg)  
 ![IMG_0354](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/7/6/76ee787d76eff9de732871267908e1b5582af2bc.jpeg)

---

<div class="post-metadata">

**Author:** ![SCALEMODEL](https://avatars.discourse-cdn.com/v4/letter/s/77aa72/32.png) [@SCALEMODEL](https://discourse.shapr3d.com/u/SCALEMODEL)\
**Post date:** [June 13, 2025, 2:39pm UTC](https://discourse.shapr3d.com/t/spring-design/38176/77 "2025-06-13T14:39:36Z")

</div>

Projection is only 2d which is why you get half and half.

If you use like a hexagon draw the lines and project to cylinder you can do full rounded projection on a cylinder.

> [@Spring design](https://discourse.shapr3d.com/t/spring-design/38176/8):
>
> Here method using 3 part sweep. If you use a polygon with four or more sides and use the face to draw your curve it will smoothly connect when you project the curve to your cylinder.

Not sure what you end looks like but, I think Alex’s version is more straight forward to do in Shapr3d.

[Previous page](https://discourse.shapr3d.com/t/spring-design/38176.md?page=3)
