# Stand from Profile Sections

**URL:** https://discourse.shapr3d.com/t/stand-from-profile-sections/9082
**Category:** Modeling Questions
**Created:** [September 22, 2020, 6:45am UTC](https://discourse.shapr3d.com/t/stand-from-profile-sections/9082 "2020-09-22T06:45:33Z")
**Posts on this page:** 1
**Page:** 1

<div class="post-metadata">

### Author: ![Gelphyn](https://avatars.discourse-cdn.com/v4/letter/g/db5fbb/32.png) [@Gelphyn](https://discourse.shapr3d.com/u/Gelphyn)
#### Post date: [September 22, 2020, 6:45am UTC](https://discourse.shapr3d.com/t/stand-from-profile-sections/9082/1 "2020-09-22T06:45:33Z")

</div>

Ref:  
[![](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/3/364d735b076d79ba65d0abe79d8585af0dc747c2.png "Jay Emery")](https://discourse.shapr3d.com/u/Jayemery)[Jayemery](https://discourse.shapr3d.com/u/Jayemery)[37m](https://discourse.shapr3d.com/t/complex-curvature/9067/9?u=gelphyn)

I there a tutorial somewhere that shows the best way to build tubular weld assemblies. In s3d

I’m trying to draw the 3d version of my oven supports made out of a stainless steel 25mm x1mm thick box section

Is it best to draw the whole thing as lines and then sweep them  
Or actually draw a box section and extrude each section  
A common practice approach would be helpful

Even if we start with just a frame for a cube  
I can hopefully work from there  
Thanks

Jay Emery

I have started a new topic rather than impinge on the OPs Thread.

Clearly you will have to set out **your dimensions and use the desired Profile** , solid has been used to enable the Clip to meet the maximum size for Videos:

[/404](https://discourse.shapr3d.com/404)