# Standing, Slanted, Curved, Walls

**URL:** https://discourse.shapr3d.com/t/standing-slanted-curved-walls/7042
**Category:** Modeling Questions
**Created:** [April 1, 2020, 1:59am UTC](https://discourse.shapr3d.com/t/standing-slanted-curved-walls/7042 "2020-04-01T01:59:20Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![jvhouse2](https://avatars.discourse-cdn.com/v4/letter/j/dfb087/32.png) [@jvhouse2](https://discourse.shapr3d.com/u/jvhouse2)
#### Post date: [April 1, 2020, 1:59am UTC](https://discourse.shapr3d.com/t/standing-slanted-curved-walls/7042/1 "2020-04-01T01:59:20Z")

</div>

Hello!

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/5/505aece968cf87fff667627611a12e441930abba.jpeg)  
I am trying to re-create the facade of this building and I’m running into trouble with creating these standing slanted curved walls. Its almost as if the walls are literally bear hugging the interior.  
I tried doing a sphere and then cutting it in different places but that didn’t work out well.

Then I tried doing a regular wall slab and cutting it but I couldn’t curve and slant the way that it is on this building.

I’m not sure I just don’t know how to use the program yet which that could definitely be it but I am really having a hard time doing this.

Can anyone share any way how to create this facade, please?

Thank you.

---

<div class="post-metadata">

### Author: ![Gelphyn](https://avatars.discourse-cdn.com/v4/letter/g/db5fbb/32.png) [@Gelphyn](https://discourse.shapr3d.com/u/Gelphyn)
#### Post date: [April 1, 2020, 6:07am UTC](https://discourse.shapr3d.com/t/standing-slanted-curved-walls/7042/2 "2020-04-01T06:07:04Z")

</div>

@jvhouse2  
You should be able to gleen much information from this Thread:

[https://discourse.shapr3d.com/t/jubilee-church/6878](https://discourse.shapr3d.com/t/jubilee-church/6878)

also:

[https://discourse.shapr3d.com/t/removing-bits-from-object/7041](https://discourse.shapr3d.com/t/removing-bits-from-object/7041)

---

<div class="post-metadata">

### Author: ![Dave\_P](https://avatars.discourse-cdn.com/v4/letter/d/43a26b/32.png) [@Dave\_P](https://discourse.shapr3d.com/u/Dave_P)
#### Post date: [April 1, 2020, 12:23pm UTC](https://discourse.shapr3d.com/t/standing-slanted-curved-walls/7042/3 "2020-04-01T12:23:22Z")

</div>

I would try calculating the angle of each wall. Create a vector and build a cylindrical model. Then trim each model to a plane to establish each wall.