# STL Export Issue – Nomad Sculpt Crashing During Remeshing After Update

**URL:** <https://discourse.shapr3d.com/t/stl-export-issue-nomad-sculpt-crashing-during-remeshing-after-update/42308>\
**Category:** Technical issues and bugs\
**Created:** [October 15, 2026, 7:17pm UTC](https://discourse.shapr3d.com/t/stl-export-issue-nomad-sculpt-crashing-during-remeshing-after-update/42308 "2026-10-15T19:17:12Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![MichaelHogan](https://avatars.discourse-cdn.com/v4/letter/m/58f4c7/32.png) [@MichaelHogan](https://discourse.shapr3d.com/u/MichaelHogan)\
**Post date:** [October 15, 2026, 7:17pm UTC](https://discourse.shapr3d.com/t/stl-export-issue-nomad-sculpt-crashing-during-remeshing-after-update/42308/1 "2026-10-15T19:17:12Z")

</div>

I’m experiencing a serious issue with my Shapr3D-to-Nomad Sculpt workflow following recent software updates, and I’m wondering whether anyone else has encountered this.

I use Shapr3D for precision jewelry modeling. Unfortunately, Shapr3D does not always reliably or predictably fuse intersecting geometries into a single printable mesh, which is necessary for successful slicing and 3D printing. As a result, I routinely export my models to Nomad Sculpt for voxel remeshing.

Recently, even extremely simple models exported from Shapr3D have begun causing Nomad Sculpt to crash consistently at approximately **43.33% during remeshing**.

The only workaround I’ve found is reducing the voxel remeshing resolution below 500, which results in an unacceptable loss of detail for jewelry manufacturing.

What’s particularly interesting is that **older Shapr3D exports continue to remesh normally** , suggesting that something may have changed in the export process. However, I’m also aware of recent Nomad Sculpt stability issues, so I can’t rule out a problem on that end.

This has effectively brought my jewelry production workflow to a halt.

Has anyone experienced similar problems with recent Shapr3D exports or Nomad Sculpt updates? I’d especially appreciate hearing from anyone who has identified the cause or found a solution that preserves model detail.

Thanks in advance for any insight!

---

<div class="post-metadata">

**Author:** ![Rita](https://avatars.discourse-cdn.com/v4/letter/r/58956e/32.png) [@Rita](https://discourse.shapr3d.com/u/Rita)\
**Post date:** [October 16, 2026, 11:23am UTC](https://discourse.shapr3d.com/t/stl-export-issue-nomad-sculpt-crashing-during-remeshing-after-update/42308/2 "2026-10-16T11:23:19Z")

</div>

Hi! We opened a support ticket for you. Please share additional information with us there, and we’ll check as soon as possible what the issue could be. Thanks in advance!