# Stud Appication guide frame plus, Secured Torque test bolt

**URL:** <https://discourse.shapr3d.com/t/stud-appication-guide-frame-plus-secured-torque-test-bolt/4168>\
**Category:** Share your creations\
**Created:** [February 25, 2019, 9:30pm UTC](https://discourse.shapr3d.com/t/stud-appication-guide-frame-plus-secured-torque-test-bolt/4168 "2019-02-25T21:30:18Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![ricko3k](https://avatars.discourse-cdn.com/v4/letter/r/ac91a4/32.png) [@ricko3k](https://discourse.shapr3d.com/u/ricko3k)\
**Post date:** [February 25, 2019, 9:30pm UTC](https://discourse.shapr3d.com/t/stud-appication-guide-frame-plus-secured-torque-test-bolt/4168/1 "2019-02-25T21:30:18Z")

</div>

![image](https://cdck-file-uploads-us1.s3.dualstack.us-west-2.amazonaws.com/flex002/uploads/shapr3d/original/2X/7/73b19f1559e3899ed783750b8feb6654875d0cfc.jpeg) ![image](https://cdck-file-uploads-us1.s3.dualstack.us-west-2.amazonaws.com/flex002/uploads/shapr3d/original/2X/e/e6272590ff7af6443dd522811c147e5aa9420a49.png)

---

<div class="post-metadata">

**Author:** ![tommyn](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/tommyn/32/1714_2.png) [@tommyn](https://discourse.shapr3d.com/u/tommyn)\
**Post date:** [February 25, 2019, 11:29pm UTC](https://discourse.shapr3d.com/t/stud-appication-guide-frame-plus-secured-torque-test-bolt/4168/2 "2019-02-25T23:29:01Z")

</div>

Nice! How does it work?

Best,

Tommy

---

<div class="post-metadata">

**Author:** ![ricko3k](https://avatars.discourse-cdn.com/v4/letter/r/ac91a4/32.png) [@ricko3k](https://discourse.shapr3d.com/u/ricko3k)\
**Post date:** [February 26, 2019, 7:03am UTC](https://discourse.shapr3d.com/t/stud-appication-guide-frame-plus-secured-torque-test-bolt/4168/3 "2019-02-26T07:03:57Z")

</div>

Thanks.

The Framework is approx 1.5M high and bolts to the floor (see levelling feet). The top portion hinges upward and back, a sheet steel panel approx 1M x 800mm is placed vertically against the frame and the top is then lowered. A “Rivnut gun” is then pushed onto the panel (locating in circular bushes x 6) and a Rivnut is accurately positioned and inserted. Repeat in remaining 5 positions. Remove Rivnut gun, lift top section and remove assembly.

The Torque test Bolt. Is inserted into a "in pressed " nut that has been applied to a sheet metal panel. A torque wrench applied and turned to check for secure fixing of nut. Before chain and washer security to work station, a plain bolt was used, it sometimes was forgotten and left in the assembly, getting to customer!

---

<div class="post-metadata">

**Author:** ![tommyn](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/tommyn/32/1714_2.png) [@tommyn](https://discourse.shapr3d.com/u/tommyn)\
**Post date:** [February 26, 2019, 2:59pm UTC](https://discourse.shapr3d.com/t/stud-appication-guide-frame-plus-secured-torque-test-bolt/4168/4 "2019-02-26T14:59:04Z")

</div>

Thanks for the explanation. Nothing worse than a spinning rivet or giving the customer a free bolt…

Best,

Tommy