# Sweep an angled sketch around a curve?

**URL:** <https://discourse.shapr3d.com/t/sweep-an-angled-sketch-around-a-curve/42695>\
**Category:** Modeling Questions\
**Created:** [November 15, 2026, 1:27am UTC](https://discourse.shapr3d.com/t/sweep-an-angled-sketch-around-a-curve/42695 "2026-11-15T01:27:16Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![scott.boroughs](https://avatars.discourse-cdn.com/v4/letter/s/f6c823/32.png) [@scott.boroughs](https://discourse.shapr3d.com/u/scott.boroughs)\
**Post date:** [November 15, 2026, 1:27am UTC](https://discourse.shapr3d.com/t/sweep-an-angled-sketch-around-a-curve/42695/1 "2026-11-15T01:27:16Z")

</div>

I’m trying to design a draft shield, and I’d like to have an angled deflector area. I’m stuck trying to figure out how to get the extrusion to go around a curve. I’d like the angled deflector wall on the left of the image to go all the way around the top surface

I think I understand why the “Sweep” tool won’t work here, but I can’t come up with another way to accomplish it, so hopefully someone has an idea?

 ![Screenshot 2026-11-14 at 5.13.00 PM](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/4/4/44b2b8be8831d22ce38fb50ab9f08a9a4cf1bb8d.png)

TIA

---

<div class="post-metadata">

**Author:** ![Oregonerd](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/oregonerd/32/8012_2.png) [@Oregonerd](https://discourse.shapr3d.com/u/Oregonerd)\
**Post date:** [November 15, 2026, 3:38am UTC](https://discourse.shapr3d.com/t/sweep-an-angled-sketch-around-a-curve/42695/2 "2026-11-15T03:38:08Z")

</div>

The corner is too tight. Instead miter the corner and fillet.

---

<div class="post-metadata">

**Author:** ![Oregonerd](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/oregonerd/32/8012_2.png) [@Oregonerd](https://discourse.shapr3d.com/u/Oregonerd)\
**Post date:** [November 15, 2026, 3:42am UTC](https://discourse.shapr3d.com/t/sweep-an-angled-sketch-around-a-curve/42695/3 "2026-11-15T03:42:27Z")

</div>

Do the main bodies first, fillets last.

 ![Screenshot 2026-11-14 194152](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/6/7/67af900e918506ae80438fd5a60dc52902bc1e1f.jpeg)
