# Sweep tool change?

**URL:** <https://discourse.shapr3d.com/t/sweep-tool-change/2157>\
**Category:** Modeling Questions\
**Created:** [March 19, 2018, 1:46am UTC](https://discourse.shapr3d.com/t/sweep-tool-change/2157 "2018-03-19T01:46:12Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Lue](https://avatars.discourse-cdn.com/v4/letter/l/c5a1d2/32.png) [@Lue](https://discourse.shapr3d.com/u/Lue)\
**Post date:** [March 19, 2018, 1:46am UTC](https://discourse.shapr3d.com/t/sweep-tool-change/2157/1 "2018-03-19T01:46:12Z")

</div>

![image](https://cdck-file-uploads-us1.s3.dualstack.us-west-2.amazonaws.com/flex002/uploads/shapr3d/original/2X/7/78fd855b515d44d05429f51996df66f025640c8a.jpeg) ![image](https://cdck-file-uploads-us1.s3.dualstack.us-west-2.amazonaws.com/flex002/uploads/shapr3d/original/2X/7/7117c57e585788db2977d2dee75d36e45310244d.jpg)

Hi, I upload the sketch. One of them was made before 3.0. Today I happened to draw it again. Surprisingly, I found it was different based on same sketch under sweep tools.

I am not sure, but how can I fix it? Thank you.

---

<div class="post-metadata">

**Author:** ![Koko\_Shapr3D](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/koko_shapr3d/32/1703_2.png) [@Koko\_Shapr3D](https://discourse.shapr3d.com/u/Koko_Shapr3D)\
**Post date:** [March 19, 2018, 11:16am UTC](https://discourse.shapr3d.com/t/sweep-tool-change/2157/2 "2018-03-19T11:16:39Z")

</div>

Hi! Could you send the workspace to [support@shapr3d.com](mailto:support@shapr3d.com)?

---

<div class="post-metadata">

**Author:** ![Lue](https://avatars.discourse-cdn.com/v4/letter/l/c5a1d2/32.png) [@Lue](https://discourse.shapr3d.com/u/Lue)\
**Post date:** [March 20, 2018, 2:27pm UTC](https://discourse.shapr3d.com/t/sweep-tool-change/2157/3 "2018-03-20T14:27:15Z")

</div>

Never mind, I made it. Thank you