# Sweeping Profiles; non-G1 paths

**URL:** <https://discourse.shapr3d.com/t/sweeping-profiles-non-g1-paths/40105>\
**Category:** Modeling Questions\
**Created:** [January 4, 2026, 9:31pm UTC](https://discourse.shapr3d.com/t/sweeping-profiles-non-g1-paths/40105 "2026-01-04T21:31:09Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![ConnorF](https://avatars.discourse-cdn.com/v4/letter/c/f14d63/32.png) [@ConnorF](https://discourse.shapr3d.com/u/ConnorF)\
**Post date:** [January 4, 2026, 9:31pm UTC](https://discourse.shapr3d.com/t/sweeping-profiles-non-g1-paths/40105/1 "2026-01-04T21:31:09Z")

</div>

I’m using Shapr3D and excited about it as I come from using Fushion360 and CAD. I am a bit confused because I made a cad file of a profile that sweeps around a path but when I made it in shapr3d it will not allow me to sweep the profile. I have attached pictures; the path is solid and not disconnected from what I can tell. Anyone have suggestions.

 ![IMG_0027](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/7/d/7d9f7821bca82296029533d2d95fe088a23fa892.jpeg)

---

<div class="post-metadata">

**Author:** ![Xdrakosha](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/xdrakosha/32/24881_2.png) [@Xdrakosha](https://discourse.shapr3d.com/u/Xdrakosha)\
**Post date:** [January 4, 2026, 10:01pm UTC](https://discourse.shapr3d.com/t/sweeping-profiles-non-g1-paths/40105/2 "2026-01-04T22:01:37Z")

</div>

It’s hard to say anything reasonable based on just a screenshot. It would be much easier if you could share the project.

Quick reconstruction doesn’t give any errors: