# Sync process

**URL:** <https://discourse.shapr3d.com/t/sync-process/21431>\
**Category:** Modeling Questions\
**Created:** [September 16, 2022, 2:06am UTC](https://discourse.shapr3d.com/t/sync-process/21431 "2022-09-16T02:06:11Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![danno11](https://avatars.discourse-cdn.com/v4/letter/d/b19c9b/32.png) [@danno11](https://discourse.shapr3d.com/u/danno11)\
**Post date:** [September 16, 2022, 2:06am UTC](https://discourse.shapr3d.com/t/sync-process/21431/1 "2022-09-16T02:06:11Z")

</div>

Sync is a great feature but i think it would be nice if you could pick the files you to have sync instead of syncing all of the designs. I think this could speed up some of the process when working on large designs, just a thought.

Thank you

---

<div class="post-metadata">

**Author:** ![Istvan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/istvan/32/23668_2.png) [@Istvan](https://discourse.shapr3d.com/u/Istvan)\
**Post date:** [September 16, 2022, 7:55am UTC](https://discourse.shapr3d.com/t/sync-process/21431/2 "2022-09-16T07:55:27Z")

</div>

We can’t do that due to technical reasons, but we are working on making Sync faster for large designs.

---

<div class="post-metadata">

**Author:** ![danno11](https://avatars.discourse-cdn.com/v4/letter/d/b19c9b/32.png) [@danno11](https://discourse.shapr3d.com/u/danno11)\
**Post date:** [September 16, 2022, 1:09pm UTC](https://discourse.shapr3d.com/t/sync-process/21431/3 "2022-09-16T13:09:05Z")

</div>

Thank you for the quick answer, when i am working on a large design would it be ok to turn off “Sync” for a while as i am working on it then when i am at a saving point turn Sync back on to sync up the latest design ant that point in time. this would jus be done to speed up the process of working on large designs.

Thank you

---

<div class="post-metadata">

**Author:** ![Istvan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/istvan/32/23668_2.png) [@Istvan](https://discourse.shapr3d.com/u/Istvan)\
**Post date:** [September 16, 2022, 1:10pm UTC](https://discourse.shapr3d.com/t/sync-process/21431/4 "2022-09-16T13:10:43Z")

</div>

Sure, it shouldn’t cause any problems.