# The drawing module and assembly needs to incorporate additional functionality

**URL:** <https://discourse.shapr3d.com/t/the-drawing-module-and-assembly-needs-to-incorporate-additional-functionality/39013>\
**Category:** Feature requests\
**Created:** [August 2, 2025, 3:44am UTC](https://discourse.shapr3d.com/t/the-drawing-module-and-assembly-needs-to-incorporate-additional-functionality/39013 "2025-08-02T03:44:23Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![wly](https://avatars.discourse-cdn.com/v4/letter/w/90db22/32.png) [@wly](https://discourse.shapr3d.com/u/wly)\
**Post date:** [August 2, 2025, 3:44am UTC](https://discourse.shapr3d.com/t/the-drawing-module-and-assembly-needs-to-incorporate-additional-functionality/39013/1 "2025-08-02T03:44:23Z")

</div>

About drawing  
1.can’t change the font size and the Dimension line size  
2.Can not add lines by myself  
3.Unable to add thread line（Due to the reason of 2 or There is no threading option in the modeling module.）  
4.Unable to add hidden outlines  
5.Unable to add a broken-out section view  
6.Difficulty in producing assembly drawings  
7.It can only be assembled by moving, and precise assembly cannot be achieved

---

<div class="post-metadata">

**Author:** ![wly](https://avatars.discourse-cdn.com/v4/letter/w/90db22/32.png) [@wly](https://discourse.shapr3d.com/u/wly)\
**Post date:** [August 2, 2025, 4:03am UTC](https://discourse.shapr3d.com/t/the-drawing-module-and-assembly-needs-to-incorporate-additional-functionality/39013/2 "2025-08-02T04:03:25Z")

</div>

It is difficult to use Shapr 3D to complete drawings that require machining. Most of the time I need to import my files into other software.

---

<div class="post-metadata">

**Author:** ![danno11](https://avatars.discourse-cdn.com/v4/letter/d/b19c9b/32.png) [@danno11](https://discourse.shapr3d.com/u/danno11)\
**Post date:** [August 3, 2025, 4:07pm UTC](https://discourse.shapr3d.com/t/the-drawing-module-and-assembly-needs-to-incorporate-additional-functionality/39013/3 "2025-08-03T16:07:13Z")

</div>

I could not agree with you more, and don’t forget that if you add a new model to a (so called Assembly) that already has a drawing done with it you will need to redo the drawing if you want that new part to show up on that existing drawing. Which really Sucks.

Thanks