# Thread tool (the new feature

**URL:** <https://discourse.shapr3d.com/t/thread-tool-the-new-feature/42702>\
**Category:** Technical issues and bugs\
**Created:** [November 15, 2026, 9:43pm UTC](https://discourse.shapr3d.com/t/thread-tool-the-new-feature/42702 "2026-11-15T21:43:59Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![mjabsk](https://avatars.discourse-cdn.com/v4/letter/m/e9c0ed/32.png) [@mjabsk](https://discourse.shapr3d.com/u/mjabsk)\
**Post date:** [November 15, 2026, 9:43pm UTC](https://discourse.shapr3d.com/t/thread-tool-the-new-feature/42702/1 "2026-11-15T21:43:59Z")

</div>

Before I invest too much time for something you may already have an easy answer for, I cannot get a threaded cylinder to mate with a threaded hole using the Thread tool. I have tried a couple different materials, layer heights, widths, M8, M10, M40 and nothing will go together. Am I missing somewhere you can adjust the tolerance? Is there something specific I need to do when sizing my cylinder and hole before applying the threads?

---

<div class="post-metadata">

**Author:** ![balintzs](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/balintzs/32/9852_2.png) [@balintzs](https://discourse.shapr3d.com/u/balintzs)\
**Post date:** [November 17, 2026, 4:15pm UTC](https://discourse.shapr3d.com/t/thread-tool-the-new-feature/42702/2 "2026-11-17T16:15:47Z")

</div>

Hello! We are soon adding the option to apply extra clearance on threads.

---

<div class="post-metadata">

**Author:** ![mjabsk](https://avatars.discourse-cdn.com/v4/letter/m/e9c0ed/32.png) [@mjabsk](https://discourse.shapr3d.com/u/mjabsk)\
**Post date:** [November 17, 2026, 4:36pm UTC](https://discourse.shapr3d.com/t/thread-tool-the-new-feature/42702/3 "2026-11-17T16:36:04Z")

</div>

That will be a great addition. Thank you.
