# 超出允许范围

**URL:** <https://discourse.shapr3d.com/t/topic/37844>\
**Category:** Modeling Questions\
**Created:** [May 7, 2025, 8:21pm UTC](https://discourse.shapr3d.com/t/topic/37844 "2025-05-07T20:21:32Z")\
**Posts on this page:** 12\
**Page:** 1

<div class="post-metadata">

**Author:** ![soya](https://avatars.discourse-cdn.com/v4/letter/s/a87d85/32.png) [@soya](https://discourse.shapr3d.com/u/soya)\
**Post date:** [May 7, 2025, 8:21pm UTC](https://discourse.shapr3d.com/t/topic/37844/1 "2025-05-07T20:21:32Z")

</div>

![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/5/e/5eab0cb5e55c39ea777dfc2b86e2aa89dc523c1f.png)  
画的草图只有大约60mm大

---

<div class="post-metadata">

**Author:** ![jean-philippe2](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/jean-philippe2/32/27353_2.png) [@jean-philippe2](https://discourse.shapr3d.com/u/jean-philippe2)\
**Post date:** [May 8, 2025, 2:16am UTC](https://discourse.shapr3d.com/t/topic/37844/2 "2025-05-08T02:16:26Z")

</div>

Hi and welcome,

> [@soya](#):
>
> 画的草图只有大约60mm大  
> The sketch was only about 60mm large

Can you be more explicit?

---

<div class="post-metadata">

**Author:** ![Xdrakosha](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/xdrakosha/32/24881_2.png) [@Xdrakosha](https://discourse.shapr3d.com/u/Xdrakosha)\
**Post date:** [May 8, 2025, 6:28am UTC](https://discourse.shapr3d.com/t/topic/37844/3 "2025-05-08T06:28:49Z")

</div>

> [@soya](#):
>
> 画的草图只有大约60mm大

> [@jean-philippe2](#):
>
> Can you be more explicit?

Screenshot says:

> The permitted area has been exceeded. The available design space is 1km³

I saw that state once, forgot how I get there.

I would try to click twice on ZXY cube in the upper corner.

---

<div class="post-metadata">

**Author:** ![TheBum](https://avatars.discourse-cdn.com/v4/letter/t/eada6e/32.png) [@TheBum](https://discourse.shapr3d.com/u/TheBum)\
**Post date:** [May 8, 2025, 6:20pm UTC](https://discourse.shapr3d.com/t/topic/37844/4 "2025-05-08T18:20:10Z")

</div>

Make sure your units of measure are correct. If you’re using meters, you could easily exceed that 1 km^3 limitation.

---

<div class="post-metadata">

**Author:** ![soya](https://avatars.discourse-cdn.com/v4/letter/s/a87d85/32.png) [@soya](https://discourse.shapr3d.com/u/soya)\
**Post date:** [May 8, 2025, 6:57pm UTC](https://discourse.shapr3d.com/t/topic/37844/5 "2025-05-08T18:57:38Z")

</div>

![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/6/c/6c020be9f0ad9ca54ce8547d49f9ec5c60111308.png)

---

<div class="post-metadata">

**Author:** ![soya](https://avatars.discourse-cdn.com/v4/letter/s/a87d85/32.png) [@soya](https://discourse.shapr3d.com/u/soya)\
**Post date:** [May 8, 2025, 6:58pm UTC](https://discourse.shapr3d.com/t/topic/37844/6 "2025-05-08T18:58:26Z")

</div>

![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/c/6/c62d250d49bcd14bfdd0e678526711bec298fcf8.png)

---

<div class="post-metadata">

**Author:** ![soya](https://avatars.discourse-cdn.com/v4/letter/s/a87d85/32.png) [@soya](https://discourse.shapr3d.com/u/soya)\
**Post date:** [May 8, 2025, 6:59pm UTC](https://discourse.shapr3d.com/t/topic/37844/7 "2025-05-08T18:59:02Z")

</div>

It can be confirmed that the unit is millimeters

---

<div class="post-metadata">

**Author:** ![soya](https://avatars.discourse-cdn.com/v4/letter/s/a87d85/32.png) [@soya](https://discourse.shapr3d.com/u/soya)\
**Post date:** [May 8, 2025, 7:00pm UTC](https://discourse.shapr3d.com/t/topic/37844/8 "2025-05-08T19:00:09Z")

</div>

It seems to have no effect

---

<div class="post-metadata">

**Author:** ![soya](https://avatars.discourse-cdn.com/v4/letter/s/a87d85/32.png) [@soya](https://discourse.shapr3d.com/u/soya)\
**Post date:** [May 8, 2025, 7:01pm UTC](https://discourse.shapr3d.com/t/topic/37844/9 "2025-05-08T19:01:08Z")

</div>

I have updated the screenshot below the post

---

<div class="post-metadata">

**Author:** ![Xdrakosha](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/xdrakosha/32/24881_2.png) [@Xdrakosha](https://discourse.shapr3d.com/u/Xdrakosha)\
**Post date:** [May 8, 2025, 7:02pm UTC](https://discourse.shapr3d.com/t/topic/37844/10 "2025-05-08T19:02:02Z")

</div>

> [@soya](#):
>
> It seems to have no effect

Can you share this project?

---

<div class="post-metadata">

**Author:** ![soya](https://avatars.discourse-cdn.com/v4/letter/s/a87d85/32.png) [@soya](https://discourse.shapr3d.com/u/soya)\
**Post date:** [May 8, 2025, 7:25pm UTC](https://discourse.shapr3d.com/t/topic/37844/11 "2025-05-08T19:25:19Z")

</div>

Due to confidentiality requirements, this file cannot be shared 🥲

---

<div class="post-metadata">

**Author:** ![Xdrakosha](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/xdrakosha/32/24881_2.png) [@Xdrakosha](https://discourse.shapr3d.com/u/Xdrakosha)\
**Post date:** [May 8, 2025, 7:34pm UTC](https://discourse.shapr3d.com/t/topic/37844/12 "2025-05-08T19:34:32Z")

</div>

> [@soya](#):
>
> Due to confidentiality requirements, this file cannot be shared

In that case I can’t help you.