# Training piece for stone setters

**URL:** <https://discourse.shapr3d.com/t/training-piece-for-stone-setters/8179>\
**Category:** Share your creations\
**Created:** [July 1, 2020, 10:23am UTC](https://discourse.shapr3d.com/t/training-piece-for-stone-setters/8179 "2020-07-01T10:23:19Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![Atelier](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/atelier/32/3595_2.png) [@Atelier](https://discourse.shapr3d.com/u/Atelier)\
**Post date:** [July 1, 2020, 10:23am UTC](https://discourse.shapr3d.com/t/training-piece-for-stone-setters/8179/1 "2020-07-01T10:23:20Z")

</div>

Hello,  
Here is a piece I proposed as a training for stone setter students. There are no bridges between the different parts because they have to be setted separately.

 ![IMG_0474](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/0/0a92848019aca1c1770ef9055dbdecfbb516760a.jpeg)

---

<div class="post-metadata">

**Author:** ![Gelphyn](https://avatars.discourse-cdn.com/v4/letter/g/db5fbb/32.png) [@Gelphyn](https://discourse.shapr3d.com/u/Gelphyn)\
**Post date:** [July 1, 2020, 3:26pm UTC](https://discourse.shapr3d.com/t/training-piece-for-stone-setters/8179/2 "2020-07-01T15:26:46Z")

</div>

@Atelier  
Very interesting.  
Is there any possibility that you display one or two ‘Stones’ after their setting operation is completed?  
Or perhaps you have some similar Designs already finished, that could be masked to show just a small area?

---

<div class="post-metadata">

**Author:** ![Atelier](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/atelier/32/3595_2.png) [@Atelier](https://discourse.shapr3d.com/u/Atelier)\
**Post date:** [July 1, 2020, 4:16pm UTC](https://discourse.shapr3d.com/t/training-piece-for-stone-setters/8179/3 "2020-07-01T16:16:30Z")

</div>

@Gelphyn  
Unfortunately, I won’t be able to show you this model finished : it has been given to the students a few days before the COVID-19 reached our area, the school closed to students, and I haven’t seen them back yet !  
But, tomorrow, I pop in to this school, and I will try to grab a similar model, all setted. Appart for the design, those training models are almost all the same, the purpose being to display the most different kinds of stone setting. I will gladly take a picture of one of this model, if I can get an hand on one !

---

<div class="post-metadata">

**Author:** ![Gelphyn](https://avatars.discourse-cdn.com/v4/letter/g/db5fbb/32.png) [@Gelphyn](https://discourse.shapr3d.com/u/Gelphyn)\
**Post date:** [July 1, 2020, 7:04pm UTC](https://discourse.shapr3d.com/t/training-piece-for-stone-setters/8179/4 "2020-07-01T19:04:04Z")

</div>

@Atelier  
Thanks for your response.  
Please do not take any risks, Stay Safe.  
Wait until everything settles down, this is not urgent.

---

<div class="post-metadata">

**Author:** ![Atelier](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/atelier/32/3595_2.png) [@Atelier](https://discourse.shapr3d.com/u/Atelier)\
**Post date:** [July 2, 2020, 9:30am UTC](https://discourse.shapr3d.com/t/training-piece-for-stone-setters/8179/5 "2020-07-02T09:30:24Z")

</div>

@Gelphyn  
No worries, I had to go to school for meetings ! 🙂

 ![IMG_0489](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/e/e5dc4fcdb477f3a178823a5401edb93b0ff30209.jpeg)  
I hope this picture will give you a better sight.

---

<div class="post-metadata">

**Author:** ![Gelphyn](https://avatars.discourse-cdn.com/v4/letter/g/db5fbb/32.png) [@Gelphyn](https://discourse.shapr3d.com/u/Gelphyn)\
**Post date:** [July 2, 2020, 9:36am UTC](https://discourse.shapr3d.com/t/training-piece-for-stone-setters/8179/6 "2020-07-02T09:36:17Z")

</div>

@Atelier  
Thank you for this information. it has provided an insight to something that I have never tried.

---

<div class="post-metadata">

**Author:** ![Atelier](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/atelier/32/3595_2.png) [@Atelier](https://discourse.shapr3d.com/u/Atelier)\
**Post date:** [July 2, 2020, 9:43am UTC](https://discourse.shapr3d.com/t/training-piece-for-stone-setters/8179/7 "2020-07-02T09:43:23Z")

</div>

You are very welcome !  
More infos I forgot to tell : for this is a « school » piece, the metal is casted brass, the stones are cubic zirconias. This is an exam piece, the students are given 24 hours to mount the stones.

---

<div class="post-metadata">

**Author:** ![tommyn](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/tommyn/32/1714_2.png) [@tommyn](https://discourse.shapr3d.com/u/tommyn)\
**Post date:** [July 2, 2020, 2:42pm UTC](https://discourse.shapr3d.com/t/training-piece-for-stone-setters/8179/8 "2020-07-02T14:42:15Z")

</div>

Thanks for sharing. Interesting! Where is the school located?

---

<div class="post-metadata">

**Author:** ![Atelier](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/atelier/32/3595_2.png) [@Atelier](https://discourse.shapr3d.com/u/Atelier)\
**Post date:** [July 2, 2020, 2:56pm UTC](https://discourse.shapr3d.com/t/training-piece-for-stone-setters/8179/9 "2020-07-02T14:56:09Z")

</div>

Hello, Thomas. The school is in Lyon, France.