# Tutorial Request: Concept art end-to-end
**URL:** https://discourse.shapr3d.com/t/tutorial-request-concept-art-end-to-end/18750
**Category:** Modeling Questions
**Created:** [April 14, 2022, 12:05am UTC](https://discourse.shapr3d.com/t/tutorial-request-concept-art-end-to-end/18750 "2022-04-14T00:05:36Z")
**Posts on this page:** 8
**Page:** 1
### Author:  [@Whatsdonisdon](https://discourse.shapr3d.com/u/Whatsdonisdon)
#### Post date: [April 14, 2022, 12:05am UTC](https://discourse.shapr3d.com/t/tutorial-request-concept-art-end-to-end/18750/1 "2022-04-14T00:05:36Z")
So Shapr3D seems amazing for CAD work - there are a ton of videos showing on YouTube showing how to model parts with Shapr.
I’d love to see a tutorial series or even just one video showing Shapr being used for concept art (e.g. game assets, VR assets, etc).
There’s a very short one here: [3D modeling a robot arm on iPad with Shapr3D - YouTube](https://www.youtube.com/watch?v=Fes-sFWWp74)
I know many of the concepts between CAD and concept art are the same - and I could just watch videos of building a toaster, the electric razor, the engine to gain the skills - but it would be really awesome to see someone who is using Shapr3D for concept art / game art modeling do a series.
---
### Author:  [@Istvan](https://discourse.shapr3d.com/u/Istvan)
#### Post date: [April 14, 2022, 9:43am UTC](https://discourse.shapr3d.com/t/tutorial-request-concept-art-end-to-end/18750/2 "2022-04-14T09:43:21Z")
Hey @Whatsdonisdon , that’s an area that is a bit out of focus for us, but I’d love to have someone from our community. Eg. this design by @peteCdesign is quite amazing:
> [@Spaceship enviroment I'm building](https://discourse.shapr3d.com/t/spaceship-enviroment-im-building/16867/63):
>
> I’m going to have an animation of this soon. Not sure if I can post videos here, ill check
---
### Author:  [@peteCdesign](https://discourse.shapr3d.com/u/peteCdesign)
#### Post date: [April 15, 2022, 8:49am UTC](https://discourse.shapr3d.com/t/tutorial-request-concept-art-end-to-end/18750/3 "2022-04-15T08:49:27Z")
I got some free screen capture/streaming software, next time I get a job that’s appropriate I might make a process video, generally speaking it seems to be a good practice for driving traffic and other people often chime in with useful suggestions
---
### Author:  [@Whatsdonisdon](https://discourse.shapr3d.com/u/Whatsdonisdon)
#### Post date: [April 15, 2022, 3:15pm UTC](https://discourse.shapr3d.com/t/tutorial-request-concept-art-end-to-end/18750/4 "2022-04-15T15:15:16Z")
Nice! That will be awesome to see for everyone.
Regarding screen recording - I would just use the iPad built in screen recorder (it’s in settings if you haven’t used it before)
Then when you’re done, just upload directly to YouTube - they’ll convert it into something smaller for you.
Probably no need to mess with other software unless you want to
---
### Author:  [@Laci\_K](https://discourse.shapr3d.com/u/Laci_K)
#### Post date: [April 16, 2022, 7:08am UTC](https://discourse.shapr3d.com/t/tutorial-request-concept-art-end-to-end/18750/5 "2022-04-16T07:08:41Z")
If you are planning to record a video, it’s probably useful for the viewers if you turn on the Tutorial mode in the iPad’s Settings / Shapr3D (or in the app’s Preferences on macOS), so they see where exactly you tap with the pencil/fingers. 🙂
---
### Author:  [@peteCdesign](https://discourse.shapr3d.com/u/peteCdesign)
#### Post date: [April 22, 2022, 11:50pm UTC](https://discourse.shapr3d.com/t/tutorial-request-concept-art-end-to-end/18750/6 "2022-04-22T23:50:24Z")
good tip but I’m using a workstation not a pad
---
### Author:  [@Laci\_K](https://discourse.shapr3d.com/u/Laci_K)
#### Post date: [April 23, 2022, 1:46pm UTC](https://discourse.shapr3d.com/t/tutorial-request-concept-art-end-to-end/18750/7 "2022-04-23T13:46:49Z")
Then you can enable it in the settings 🙂
---
### Author:  [@peteCdesign](https://discourse.shapr3d.com/u/peteCdesign)
#### Post date: [April 27, 2022, 6:07am UTC](https://discourse.shapr3d.com/t/tutorial-request-concept-art-end-to-end/18750/8 "2022-04-27T06:07:41Z")
thanks that’s a good tip