# Umake compatibility

**URL:** <https://discourse.shapr3d.com/t/umake-compatibility/1841>\
**Category:** Modeling Questions\
**Created:** [December 13, 2017, 10:57am UTC](https://discourse.shapr3d.com/t/umake-compatibility/1841 "2017-12-13T10:57:51Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![rubenka](https://avatars.discourse-cdn.com/v4/letter/r/a9a28c/32.png) [@rubenka](https://discourse.shapr3d.com/u/rubenka)\
**Post date:** [December 13, 2017, 10:57am UTC](https://discourse.shapr3d.com/t/umake-compatibility/1841/1 "2017-12-13T10:57:51Z")

</div>

Hello Shapr3D staff in wonderful Budapest. Wish you great success.

My question actually is, if your software is compatible with umake, the 3D sketching software?

Best wishes, Reuven

---

<div class="post-metadata">

**Author:** ![Istvan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/istvan/32/23668_2.png) [@Istvan](https://discourse.shapr3d.com/u/Istvan)\
**Post date:** [December 13, 2017, 10:59am UTC](https://discourse.shapr3d.com/t/umake-compatibility/1841/2 "2017-12-13T10:59:11Z")

</div>

I believe you can export STEP files from Umake, that can be imported to Shapr.

---

<div class="post-metadata">

**Author:** ![Gabor\_Shapr3D](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/gabor_shapr3d/32/235_2.png) [@Gabor\_Shapr3D](https://discourse.shapr3d.com/u/Gabor_Shapr3D)\
**Post date:** [December 13, 2017, 11:00am UTC](https://discourse.shapr3d.com/t/umake-compatibility/1841/3 "2017-12-13T11:00:53Z")

</div>

uMake and Shapr3D both support STEP and IGES formats. So can try to exchange files with these formats. STEP is generally better than IGES, so I’d try export / import with STEP.

---

<div class="post-metadata">

**Author:** ![rubenka](https://avatars.discourse-cdn.com/v4/letter/r/a9a28c/32.png) [@rubenka](https://discourse.shapr3d.com/u/rubenka)\
**Post date:** [December 13, 2017, 11:16am UTC](https://discourse.shapr3d.com/t/umake-compatibility/1841/4 "2017-12-13T11:16:08Z")

</div>

Thank you very much.

בתאריך 13 בדצמ 2017 13:11,‏ “Gabor Papp” [shapr3d@discoursemail.com](mailto:shapr3d@discoursemail.com) כתב: