# Want to Design simple Cribbage Board Peg

**URL:** <https://discourse.shapr3d.com/t/want-to-design-simple-cribbage-board-peg/23930>\
**Category:** Modeling Questions\
**Created:** [February 3, 2023, 5:57pm UTC](https://discourse.shapr3d.com/t/want-to-design-simple-cribbage-board-peg/23930 "2023-02-03T17:57:44Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![mikenbrenda](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/mikenbrenda/32/6386_2.png) [@mikenbrenda](https://discourse.shapr3d.com/u/mikenbrenda)\
**Post date:** [February 3, 2023, 5:57pm UTC](https://discourse.shapr3d.com/t/want-to-design-simple-cribbage-board-peg/23930/1 "2023-02-03T17:57:44Z")

</div>

I am trying to make just a cribbage peg like these, and for some reason I sketch it out in the measurements I wanted, then I did a Revolve and i get something totally different with a hole in it even…

Can i get someone to sho me how to do a simple cribbage peg, I would love the little separations in the top part also…

 ![Screenshot 2023-02-03 at 11.52.41 AM](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/6/9/69a373d13d78990527e0781abd4f607f44b0fb48.jpeg)  
 ![Screenshot 2023-02-03 at 11.53.09 AM](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/3/6/36de8b4a3be053df093f1360152b7ec1b7e91ffc.jpeg)  
 ![Screenshot 2023-02-03 at 11.53.17 AM](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/b/5/b5c8c02e888f8c0474f469893786d17b21ef325e.jpeg)  
 ![Screenshot 2023-02-03 at 11.54.13 AM](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/b/7/b7103ab2ed8de8a98d29f214db5463117a2c4712.png)

---

<div class="post-metadata">

**Author:** ![NathanD](https://avatars.discourse-cdn.com/v4/letter/n/dec6dc/32.png) [@NathanD](https://discourse.shapr3d.com/u/NathanD)\
**Post date:** [February 3, 2023, 6:11pm UTC](https://discourse.shapr3d.com/t/want-to-design-simple-cribbage-board-peg/23930/2 "2023-02-03T18:11:07Z")

</div>

The resulting body of the revolve operation is based on the axis you are revolving around.

Your sketch is being revolved around the z axis in the modeling space.

Instead, try drawing a line down the center of your sketch, bisecting it.

Select one half of the peg sketch, then revolve that _half_ around the center axis line that divided the sketch.

Hope this helps.

---

<div class="post-metadata">

**Author:** ![McD](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/mcd/32/15504_2.png) [@McD](https://discourse.shapr3d.com/u/McD)\
**Post date:** [February 3, 2023, 6:11pm UTC](https://discourse.shapr3d.com/t/want-to-design-simple-cribbage-board-peg/23930/3 "2023-02-03T18:11:47Z")

</div>

Just draw half of it. And rotate it. You’re rotating the full item.

---

<div class="post-metadata">

**Author:** ![TheBum](https://avatars.discourse-cdn.com/v4/letter/t/eada6e/32.png) [@TheBum](https://discourse.shapr3d.com/u/TheBum)\
**Post date:** [February 3, 2023, 6:37pm UTC](https://discourse.shapr3d.com/t/want-to-design-simple-cribbage-board-peg/23930/4 "2023-02-03T18:37:25Z")

</div>

As for the separations, design them into the sketch you revolve as notches.

---

<div class="post-metadata">

**Author:** ![Stephen](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/stephen/32/16350_2.png) [@Stephen](https://discourse.shapr3d.com/u/Stephen)\
**Post date:** [February 3, 2023, 11:00pm UTC](https://discourse.shapr3d.com/t/want-to-design-simple-cribbage-board-peg/23930/5 "2023-02-03T23:00:03Z")

</div>

Draw half and then revolve it. I’ve done a quick video that might help.

---

<div class="post-metadata">

**Author:** ![mikenbrenda](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/mikenbrenda/32/6386_2.png) [@mikenbrenda](https://discourse.shapr3d.com/u/mikenbrenda)\
**Post date:** [February 4, 2023, 3:14pm UTC](https://discourse.shapr3d.com/t/want-to-design-simple-cribbage-board-peg/23930/6 "2023-02-04T15:14:50Z")

</div>

Yes!, Great Idea! and it worked! Thanks…been awhile since i used Shapr3d

---

<div class="post-metadata">

**Author:** ![mikenbrenda](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/mikenbrenda/32/6386_2.png) [@mikenbrenda](https://discourse.shapr3d.com/u/mikenbrenda)\
**Post date:** [February 4, 2023, 3:15pm UTC](https://discourse.shapr3d.com/t/want-to-design-simple-cribbage-board-peg/23930/7 "2023-02-04T15:15:39Z")

</div>

Thanks! i knew i forgot something duh, been awhile since i used shapr3d was really getting into it and a 10 month break off is not good…thaks MCD

---

<div class="post-metadata">

**Author:** ![mikenbrenda](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/mikenbrenda/32/6386_2.png) [@mikenbrenda](https://discourse.shapr3d.com/u/mikenbrenda)\
**Post date:** [February 4, 2023, 3:17pm UTC](https://discourse.shapr3d.com/t/want-to-design-simple-cribbage-board-peg/23930/8 "2023-02-04T15:17:28Z")

</div>

Thank you so much! been awhile since I used shapr3d, i cannot take a 10 month hiatus…i forgot i had to draw half of it…Tahnks so much for the video!