# ミラーモードにおけるスケッチ移動 Win10

**URL:** <https://discourse.shapr3d.com/t/win10/37984>\
**Category:** Modeling Questions\
**Created:** [May 16, 2025, 12:23pm UTC](https://discourse.shapr3d.com/t/win10/37984 "2025-05-16T12:23:07Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mononium](https://avatars.discourse-cdn.com/v4/letter/m/7cd45c/32.png) [@Mononium](https://discourse.shapr3d.com/u/Mononium)\
**Post date:** [May 16, 2025, 12:23pm UTC](https://discourse.shapr3d.com/t/win10/37984/1 "2025-05-16T12:23:08Z")

</div>

スタッフの皆さんいつもありがとうございます。  
今回、困ったことがあり投稿いたします。

スケッチモードでミラーツールを使った移動および回転ができずに困っています。  
スケッチ拘束のため変形に失敗とメッセージが出ます。  
これは仕様なのでしょうか？  
ちなみに拘束ボタンはグレーアウトしていて何もできません。

 ![Shapr3D 2025-05-16 21.18.07](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/d/a/da0e3b5aef0518a4d37a9adcfa0272e153394d93.jpeg)

移動などができると便利なのですが、教えていただきたいです。  
過去のトピックも見ましたが解決方法が見つかりませんでした。  
よろしくお願いいたします。

---

<div class="post-metadata">

**Author:** ![Xdrakosha](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/xdrakosha/32/24881_2.png) [@Xdrakosha](https://discourse.shapr3d.com/u/Xdrakosha)\
**Post date:** [May 16, 2025, 1:22pm UTC](https://discourse.shapr3d.com/t/win10/37984/2 "2025-05-16T13:22:36Z")

</div>



---

<div class="post-metadata">

**Author:** ![Mononium](https://avatars.discourse-cdn.com/v4/letter/m/7cd45c/32.png) [@Mononium](https://discourse.shapr3d.com/u/Mononium)\
**Post date:** [May 16, 2025, 2:02pm UTC](https://discourse.shapr3d.com/t/win10/37984/3 "2025-05-16T14:02:49Z")

</div>

Xdrakoshaさん

ありがとうございます！  
おかげさまで移動だけはできました。しかし回転ができないようです。  
添付の画像の上のスケッチは回転はできませんが、下のスケッチはできますので仕様ではないことがわかりました。

 ![Shapr3D 2025-05-16 23.01.20](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/a/e/aec2813410494fed0404a4bae36d5b108d2a55d3.jpeg)

---

<div class="post-metadata">

**Author:** ![Xdrakosha](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/xdrakosha/32/24881_2.png) [@Xdrakosha](https://discourse.shapr3d.com/u/Xdrakosha)\
**Post date:** [May 16, 2025, 2:09pm UTC](https://discourse.shapr3d.com/t/win10/37984/4 "2025-05-16T14:09:06Z")

</div>

It depends on the constraints you applied to the sketch. Sometimes it’s easier to make a copy during rotate and delete old one.

---

<div class="post-metadata">

**Author:** ![Mononium](https://avatars.discourse-cdn.com/v4/letter/m/7cd45c/32.png) [@Mononium](https://discourse.shapr3d.com/u/Mononium)\
**Post date:** [May 16, 2025, 2:25pm UTC](https://discourse.shapr3d.com/t/win10/37984/5 "2025-05-16T14:25:03Z")

</div>

Thank you. Even after copying, I wasn’t able to rotate or move it in move mode. I’ve decided to give up and start over from scratch. I wanted to make a cat. Thanks to you, I feel more relaxed now. It’s 11 p.m. here in Japan, and I think I’ll be able to sleep well. I hope you have a great weekend.

 ![Shapr3D 2025-05-16 23.23.38](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/f/b/fb1ae36eb7ab8b81bcdc8023bf3c4c00b71eb8f4.jpeg)

---

<div class="post-metadata">

**Author:** ![Xdrakosha](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/xdrakosha/32/24881_2.png) [@Xdrakosha](https://discourse.shapr3d.com/u/Xdrakosha)\
**Post date:** [May 16, 2025, 2:35pm UTC](https://discourse.shapr3d.com/t/win10/37984/6 "2025-05-16T14:35:56Z")

</div>

As I said it depends on the applied constraints. To have more control on them you can turn of auto constraints:

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/a/e/aefdd88c60fe8c79a2a686eeeb368398b1f6a9c5.png)

Here is my quick copy of cat ear, as you can see I can rotate it aster mirrored copy:

---

<div class="post-metadata">

**Author:** ![Mononium](https://avatars.discourse-cdn.com/v4/letter/m/7cd45c/32.png) [@Mononium](https://discourse.shapr3d.com/u/Mononium)\
**Post date:** [May 16, 2025, 3:21pm UTC](https://discourse.shapr3d.com/t/win10/37984/7 "2025-05-16T15:21:17Z")

</div>

Thank you so much. After watching the video, I noticed that all of your handles were purple. In my case, there were some green ones mixed in. I thought that might be the issue, so I fiddled with it a bit and turned them all purple (as shown in the image), and then I was able to both rotate and move the sketch!

 ![cat](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/4/2/426f0a2e4fb978f0ed06f2f86fe5b306031ba44e.png)

(It seems that first-time users can’t post videos—sorry about that.)

I also matched the constraint settings to yours. I think the settings might have been different when I first created the sketch.

Now I feel like I can sleep much better. And the anxiety that the same thing might happen again in Shapr3D is gone.  
It’s all thanks to you. I truly appreciate it. The cat is happy too.

---

<div class="post-metadata">

**Author:** ![Xdrakosha](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/xdrakosha/32/24881_2.png) [@Xdrakosha](https://discourse.shapr3d.com/u/Xdrakosha)\
**Post date:** [May 16, 2025, 3:24pm UTC](https://discourse.shapr3d.com/t/win10/37984/8 "2025-05-16T15:24:51Z")

</div>

> [@Mononium](#):
>
> I noticed that all of your handles were purple. In my case, there were some green ones mixed in.

That’s right. Green means they constrained enough to be locked in place.

---

<div class="post-metadata">

**Author:** ![Mononium](https://avatars.discourse-cdn.com/v4/letter/m/7cd45c/32.png) [@Mononium](https://discourse.shapr3d.com/u/Mononium)\
**Post date:** [May 16, 2025, 3:27pm UTC](https://discourse.shapr3d.com/t/win10/37984/9 "2025-05-16T15:27:11Z")

</div>

> [@Xdrakosha](#):
>
> That’s right. Green means they constrained enough to be locked in place.

Thank you! I’ll make sure to remember that rule from now on!