# Wondering how to draw this sculpture or similar

**URL:** <https://discourse.shapr3d.com/t/wondering-how-to-draw-this-sculpture-or-similar/17491>\
**Category:** Modeling Questions\
**Created:** [February 17, 2022, 6:12pm UTC](https://discourse.shapr3d.com/t/wondering-how-to-draw-this-sculpture-or-similar/17491 "2022-02-17T18:12:42Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Cruhl](https://avatars.discourse-cdn.com/v4/letter/c/258eb7/32.png) [@Cruhl](https://discourse.shapr3d.com/u/Cruhl)\
**Post date:** [February 17, 2022, 6:12pm UTC](https://discourse.shapr3d.com/t/wondering-how-to-draw-this-sculpture-or-similar/17491/1 "2022-02-17T18:12:42Z")

</div>

Hi,

A friend of mine manage to produce this sculpture.  
I want to draw similar projects.  
Any ideas how to draw it, is it possible.

Thank you in advance for any inputs, regards,

Cris

---

<div class="post-metadata">

**Author:** ![Cruhl](https://avatars.discourse-cdn.com/v4/letter/c/258eb7/32.png) [@Cruhl](https://discourse.shapr3d.com/u/Cruhl)\
**Post date:** [February 17, 2022, 6:13pm UTC](https://discourse.shapr3d.com/t/wondering-how-to-draw-this-sculpture-or-similar/17491/2 "2022-02-17T18:13:08Z")

</div>

![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/0/08b1941234f3a0a86778f5d1895a88b6f21a2986.jpeg)

Material to make it was Stainless Steel 316 flat bars 100x6mm  
Height 800mm….

---

<div class="post-metadata">

**Author:** ![SM1](https://avatars.discourse-cdn.com/v4/letter/s/9de0a6/32.png) [@SM1](https://discourse.shapr3d.com/u/SM1)\
**Post date:** [February 17, 2022, 6:46pm UTC](https://discourse.shapr3d.com/t/wondering-how-to-draw-this-sculpture-or-similar/17491/3 "2022-02-17T18:46:19Z")

</div>

I would suggest using loft like this:

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/3/37c1072ed9d19a021bf8d9bb8326aeb2a3aa6fed.jpeg)  
 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/6/670e225dbc347fdd44fbe16454086d4e25732278.jpeg)

Just copy and move/rotate the sketch to where you want to twist or turn it

---

<div class="post-metadata">

**Author:** ![TigerMike](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/tigermike/32/32650_2.png) [@TigerMike](https://discourse.shapr3d.com/u/TigerMike)\
**Post date:** [February 17, 2022, 7:03pm UTC](https://discourse.shapr3d.com/t/wondering-how-to-draw-this-sculpture-or-similar/17491/4 "2022-02-17T19:03:29Z")

</div>

Loft could work as @SM1 suggested.  
Another way is to extrude and twist the ends with Move-Rotate. I did this after I subtracted two ends to give it a wedge look before I twisted.

---

<div class="post-metadata">

**Author:** ![Cruhl](https://avatars.discourse-cdn.com/v4/letter/c/258eb7/32.png) [@Cruhl](https://discourse.shapr3d.com/u/Cruhl)\
**Post date:** [February 17, 2022, 7:22pm UTC](https://discourse.shapr3d.com/t/wondering-how-to-draw-this-sculpture-or-similar/17491/5 "2022-02-17T19:22:01Z")

</div>

Thank you so much for the ideas, I will start trying again with these samples you showed, really appreciate the help.  
Another picture of other side.

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/f/f09a167f697be4897b2961b7eb81d021b56ef854.jpeg)