Does anybody have an actual process for design of actual threads(bolt and threaded hole) for 3D printing? Subtracting simple “revolved” thread doesn’t work, there is no gap or fit tolarance. Tried scaling to get some gap, but threads no longer line up. Tried over sizing the subtracted thread, but ag…

Hi - We have a recent thread on this subject: Threads (nuts and bolts) - solution found

What is the tolerance of your 3D printer? Threads properly achieved should fall into the ± .005 for a smooth transition. That may vary depending on the application, material and so on. Are you able to measure the pitch, major and minor diameters with a thread micrometer or optical comparator? Worst…

How many folks even deal with the coefficient of thermal expansion when working with close tolerances specifically in plastic… For the most part temperatures do not have an impact… If you’re going to adhere to the GD&T while designing (Geometric dimensioning and tolerancing, it’s something to cons…

My 3D printed threads work great from Fusion 3D. Shapr3D has some work to do concerning threaded features. It’s understandable it can’t do everything yet.

Thats fact… :sunglasses: To be clearer, Shapr3D can do threads… :nerd_face:

I’m trying to create a 12mm fine thread with a pitch of 1.5mm. I draw the thread profile from iso tables and revolve it around the axis but it won’t revolve more than 360deg. I get an error message that there are invalid faces. The spiral does not intersect but I can get it to revolve multiple times…

My mistake. I confused length with pitch. Sorted now.

Reviving this thread since the response link is not working. Creating threads on male and female bodies that you can work and print is very easy on fusion. You just make sure that your male / female parts are correctly sized then just add threads on the curved feature (and you get to choose the len…

Yeah they need sticky topics… That would be one of them.

Create actual 3D printed threads

Need help? We are here.

Mathis58 February 6, 2024, 4:37pm 15

Topic		Replies	Views
3D printing thread tolerances: can offset-face be the way? Need help? We are here.	12	3066	April 5, 2021
How to make bolts and nuts Share your creations	30	14641	January 21, 2025
How to create threads Need help? We are here.	15	20598	May 2, 2022
I would like to be able to create threads easily Feature requests	6	1333	October 27, 2024
Creating threads without helixes Feature requests	14	2653	November 17, 2023

Create actual 3D printed threads

Related topics