Challenge Number 4 is live! :construction: Time for another modeling challenge — and this one comes straight from the street. :eyes: What you’ll be building :vertical_traffic_light: For Challenge #4, your task is to model a traffic cone using the provided dimensions and reference images below. You…

[image] Xdrakosha: IMHO, that’s not a tip. It’s a required parameter that was missing from the original task. I have to agree here. I also figured the “correct solution” was to do with the cones having to stack, but for a practical construction you’d surely ad some measure of tolerance or cle…

This can’t be a tip. There is no constraint or measurement to derive this the measurement from the original design blueprint.

I thought it was that but it is not actually, the cones stack but this does not define the missing dimension. [IMG_0873]

Has the bunny not seen another cone for a while? :face_with_hand_over_mouth:

[image] Fawksey3D: Has the bunny not seen another cone for a while? :face_with_hand_over_mouth: No, it was his first one! :blush: And maybe his last.

[image] DrKronos: d have been it’s not a tip, it’s the fault of the drawing.

What is 1.311.9mm is that 1311.9mm, which is way too tall for a traffic cone. 1.31metres

I just started trying to work Season 2’s challenges and find it difficult to find what tools are acceptable for challenge 4. What is the definition of construction tools?

[image] JanM: What is the definition of construction tools? I guess that’s everything under the Construct menu. [image]

Season 2 Challenge #4 is DONE | Extrude 4/5

Weekly challenges Season 2 - Extrude

MrKodama September 9, 2026, 8:28pm 26

My first submission. I learnt about how to cut a cone into 3 separate bodies, which was very useful

Modeling question: How to achieve smooth transition between solid body and closed end surface for a bike saddle?

Topic		Replies	Views
Season 2 Challenge #2 is DONE \| Extrude 2/5 Season 2 - Extrude	15	710	August 30, 2026
Season 2 Challenge #3 is DONE \| Extrude 3/5 Season 2 - Extrude	15	810	September 4, 2026
Season 2 Challenge #5 is DONE \| Extrude 5/5 Season 2 - Extrude featured	5	302	September 13, 2026
Season 2 Challenge #1 is DONE \| Extrude 1/5 Season 2 - Extrude	19	949	August 21, 2026
Season 1 Challenge #4 is DONE \| Parametric Sketching 4/5 Season 1 - Parametric Sketching	5	319	July 27, 2026

Season 2 Challenge #4 is DONE | Extrude 4/5

Related topics